Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The LINDY USB 3.1 Type C to Type A cables feature a reversible Type C connector and are not constrained by a Host to Device directional connection that existed under previous USB specifications. <br>As well as supporting SuperSpeed+/Gen 2 data transfer rates of up to 10Gbps, the cables are also capable of supporting DisplayPort Alternative Mode (DisplayPort up to 4K 3840x2160). This cable does not support USB Power Delivery Mode, our range of cables with USB Power Delivery Mode are available here.<br>Important: This USB 3.1 compatible cable features the reversible Type C connector, please check that your devices have a USB Type C port before purchasing this cable.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-115-5339, indicating validated use in U.S. government and defense logistics supply chains.
WHERE IT FITS
41877
NSN:5330-00-115-5339 FSC:5330 CAGE:56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
material
STEEL CORROSION RESISTING BODY
NSN
5330-00-115-5339
COMPONENT DIAGRAM
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY 6061 OVERALL
•
OUTSIDE DIAMETER: 1.060 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.080 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 3
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8 T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
BOLT CIRCLE DIAMETER: 0.780 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.130 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL
ALUMINUM ALLOY 6061 OVERALL
OUTSIDE DIAMETER
1.060 INCHES NOMINAL IN
SURFACE TREATMENT
ANODIZE OVERALL
CROSS-SECTIONAL THICKNESS
0.080 INCHES NOMINAL IN
BOLT HOLE QUANTITY
3
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-225/8 T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
BOLT CIRCLE DIAMETER
0.780 INCHES NOMINAL IN
HOLE DIAMETER
0.130 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE DIAMETER
0.500 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41877?
41877 is a HEAD,LINEAR ACTUATING CYLINDER manufactured by Lindy.
What parts can replace 41877?
There are 7 known substitutes for 41877: 120-356F, AE48-7, B94.19 TABLE 60 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 41877?
41877 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-115-5339. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.