PartsTable
Technical Data Sheet
Download PDF

418412 — INVERTED NUT,TUBE COUPLING

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

418412: INVERTED NUT,TUBE COUPLING.

The INVERTED NUT,TUBE COUPLING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, block_type: SNATCH, load_rating: 10000.0 POUNDS MAXIMUM LBS, bearing_type: ROLLER, shell_length: 8.570 INCHES NOMINAL IN, locking_style: SAFETY LOCKING. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-053-3497, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
418412
NSN: 4730-00-053-3497
NIINs: 000533497, 003385653
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 77969 — RUBBERCRAFT CORPORATION OF CALIFORNIA, LTD. DBA RUBBERCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
block_typeSNATCH
load_rating10000.0 POUNDS MAXIMUM LBS
bearing_typeROLLER
shell_length8.570 INCHES NOMINAL IN
locking_styleSAFETY LOCKING
sheave_quantity1
attachment_styleFLATTED STIFF SWIVEL SAFETY SNAP HOOK
style_designatorPULLEY PATTERN
antitoppling_deviceNOT INCLUDED
center_pin_diameter1.000 INCHES NOMINAL IN
tackle_locking_deviceNOT INCLUDED
NSN4730-00-053-3497
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 418412 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.875 INCHES NOMINAL IN
•
MATERIAL HARDNESS RATING: 20.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
SEAT ANGLE IN DEG: 33.0
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: INVERTED NUT, TUBE, FLARE
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-18732, COND HT-200 MIL SPEC SINGLE MATERIAL RESPONSE
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.875 INCHES NOMINAL IN
MATERIAL HARDNESS RATING20.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
SEAT ANGLE IN DEG33.0
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.750 INCHES NOMINAL IN
STYLE DESIGNATORINVERTED NUT, TUBE, FLARE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-18732, COND HT-200 MIL SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH0.813 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
CASEHARDENING INDICATORNOT CASEHARDENED
THREAD SIZE1.062-12
SUBSTITUTES & CROSS-REFERENCES 1
NAS594-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 418412?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 418412?
418412 is a INVERTED NUT,TUBE COUPLING.
What parts can replace 418412?
There is 1 known substitute for 418412: NAS594-12. Substitute compatibility should be verified for your specific system.
What is the NSN for 418412?
418412 is cataloged in the U.S. Government catalog under NSN 4730-00-053-3497. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 418412

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.