PartsTable
Technical Data Sheet
PartsTable / MRO / 418-3
418-3 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: ASBESTOS OVERALL, block_type: SNATCH, seal_width: 0.500 INCHES NOMINAL IN, body_length: 2.000 INCHES NOMINAL IN, load_rating: 6000.0 POUNDS MAXIMUM LBS, temp_rating: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-2804, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 418-3
NSN: 3110-00-198-2804
FSC: 3110
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
materialASBESTOS OVERALL
block_typeSNATCH
seal_width0.500 INCHES NOMINAL IN
body_length2.000 INCHES NOMINAL IN
load_rating6000.0 POUNDS MAXIMUM LBS
temp_rating-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
bearing_typeROLLER
constructionSOLID
body_diameter0.625 INCHES NOMINAL IN
locking_styleSAFETY LOCKING
terminal_typeTAB, SOLDER LUG
inclosure_typeENCAPSULATED
NSN3110-00-198-2804
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 418-3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ROLLING ELEMENT DIAMETER: 0.1580 INCHES MINIMUM AND 0.1582 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 5140 OVERALL
•
STYLE DESIGNATOR: NEEDLE ROLLER, SPHERICAL ENDS
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH0.7200 INCHES MINIMUM AND 0.7400 INCHES MAXIMUM IN
ROLLING ELEMENT DIAMETER0.1580 INCHES MINIMUM AND 0.1582 INCHES MAXIMUM IN
MATERIALSTEEL COMP 5140 OVERALL
STYLE DESIGNATORNEEDLE ROLLER, SPHERICAL ENDS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
25954-1-42Interchangeable
interchangeable cross-reference
interchangeable
418-3Interchangeable
interchangeable cross-reference
interchangeable
2A219TVIT750HMT25T25T25Interchangeable
interchangeable cross-reference
interchangeable
710Interchangeable
interchangeable cross-reference
interchangeable
1611-1/2Interchangeable
interchangeable cross-reference
interchangeable
111-1/2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 418-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 418-3?
418-3 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 418-3?
There are 16 known substitutes for 418-3: 25954-1-42, 418-3, 2A219TVIT750HMT25T25T25 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 418-3?
418-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-2804. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 418-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026