PartsTable
Technical Data Sheet
Download PDF

417407 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

417407: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE AND TAPERED, first_leg_length: 0.320 INCHES NOMINAL IN, second_leg_style: CORNER RADIUS, second_leg_width: 3.032 INCHES MINIMUM AND 3.064 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-532-9888, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
417407
NSN: 5340-00-532-9888
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 410
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE AND TAPERED
first_leg_length0.320 INCHES NOMINAL IN
second_leg_styleCORNER RADIUS
second_leg_width3.032 INCHES MINIMUM AND 3.064 INCHES MAXIMUM IN
style_designatorANGLE
second_leg_length0.754 INCHES MINIMUM AND 0.786 INCHES MAXIMUM IN
first_leg_thickness0.056 INCHES NOMINAL IN
second_leg_thickness0.056 INCHES NOMINAL IN
second_leg_corner_radius0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
second_leg_hole_diameter0.286 INCHES NOMINAL IN
NSN5340-00-532-9888
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 417407 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG HOLE DIAMETER: 0.286 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 3.032 INCHES MINIMUM AND 3.064 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 0.754 INCHES MINIMUM AND 0.786 INCHES MAXIMUM IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: SQUARE AND TAPERED
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER0.286 INCHES NOMINAL IN
SECOND LEG WIDTH3.032 INCHES MINIMUM AND 3.064 INCHES MAXIMUM IN
SECOND LEG LENGTH0.754 INCHES MINIMUM AND 0.786 INCHES MAXIMUM IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
STYLE DESIGNATORANGLE
FIRST LEG STYLESQUARE AND TAPERED
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5504 ASSN STD SINGLE MATERIAL RESPONSE
SECOND LEG THICKNESS0.056 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 417407?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 417407?
417407 is a BRACKET,ANGLE.
What is the NSN for 417407?
417407 is cataloged in the U.S. Government catalog under NSN 5340-00-532-9888. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 417407

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.