PartsTable
Technical Data Sheet
Download PDF

417389-4REVA — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

417389-4REVA: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.141 INCHES NOMINAL IN, overall_width: 0.250 INCHES NOMINAL IN, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, THREADED AND ROUND, UNTHREADED, surface_treatment: TIN OVERALL, nominal_thread_size: 0.112 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-382-5710, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
417389-4REVA
NSN: 5340-00-382-5710
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
diameter0.141 INCHES NOMINAL IN
overall_width0.250 INCHES NOMINAL IN
style_designatorCENTER MOUNT
tongue_hole_typeROUND, THREADED AND ROUND, UNTHREADED
surface_treatmentTIN OVERALL
nominal_thread_size0.112 INCHES IN
fastening_device_typePLAIN SLOTTED HEAD SCREW
thread_quantity_per_inch48
NSN5340-00-382-5710
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 417389-4REVA MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENING DEVICE TYPE: PLAIN SLOTTED HEAD SCREW
•
STYLE DESIGNATOR: CENTER MOUNT
•
DIAMETER: 0.141 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
SURFACE TREATMENT: TIN OVERALL
•
THREAD QUANTITY PER INCH: 48
•
TONGUE HOLE TYPE: ROUND, THREADED AND ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
FASTENING DEVICE TYPEPLAIN SLOTTED HEAD SCREW
STYLE DESIGNATORCENTER MOUNT
DIAMETER0.141 INCHES NOMINAL IN
OVERALL WIDTH0.250 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.112 INCHES IN
SURFACE TREATMENTTIN OVERALL
THREAD QUANTITY PER INCH48
TONGUE HOLE TYPEROUND, THREADED AND ROUND, UNTHREADED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
417389PC4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 417389-4REVA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 417389-4REVA?
417389-4REVA is a CLAMP,LOOP.
What parts can replace 417389-4REVA?
There is 1 known substitute for 417389-4REVA: 417389PC4. Substitute compatibility should be verified for your specific system.
What is the NSN for 417389-4REVA?
417389-4REVA is cataloged in the U.S. Government catalog under NSN 5340-00-382-5710. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 417389-4REVA