PartsTable
Technical Data Sheet
Download PDF

417181PC1 — CRANK,HAND

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

417181PC1: CRANK,HAND.

The CRANK,HAND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, drive_width: 0.062 INCHES NOMINAL IN, shank_height: 0.188 INCHES NOMINAL IN, drive_end_style: EXTERNAL, thread_diameter: 0.099 INCHES NOMINAL IN, thread_location: EXTERNAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-157-1415, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
417181PC1
NSN: 5340-00-157-1415
FSC: 5340 — Hardware, Commercial
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
drive_width0.062 INCHES NOMINAL IN
shank_height0.188 INCHES NOMINAL IN
drive_end_styleEXTERNAL
thread_diameter0.099 INCHES NOMINAL IN
thread_locationEXTERNAL
thread_directionRIGHT-HAND
drive_facility_styleFLATTED, TWO SIDES PARALLEL
thread_quantity_per_inch48
drive_facility_thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5340-00-157-1415
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 417181PC1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DRIVE FACILITY THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
DRIVE WIDTH: 0.062 INCHES NOMINAL IN
•
SHANK HEIGHT: 0.188 INCHES NOMINAL IN
•
DRIVE END STYLE: EXTERNAL
•
THREAD DIAMETER: 0.099 INCHES NOMINAL IN
•
THREAD LOCATION: EXTERNAL
•
DRIVE FACILITY STYLE: FLATTED, TWO SIDES PARALLEL
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
DRIVE FACILITY THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
DRIVE WIDTH0.062 INCHES NOMINAL IN
SHANK HEIGHT0.188 INCHES NOMINAL IN
DRIVE END STYLEEXTERNAL
THREAD DIAMETER0.099 INCHES NOMINAL IN
THREAD LOCATIONEXTERNAL
DRIVE FACILITY STYLEFLATTED, TWO SIDES PARALLEL
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH48
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 417181PC1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 417181PC1?
417181PC1 is a CRANK,HAND.
What is the NSN for 417181PC1?
417181PC1 is cataloged in the U.S. Government catalog under NSN 5340-00-157-1415. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 417181PC1