PartsTable
Technical Data Sheet
Download PDF

417012PC2 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

417012PC2: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shank_length: 0.830 INCHES NOMINAL IN, overall_length: 1.340 INCHES NOMINAL IN, shank_diameter: 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, undercut_width: 0.030 INCHES NOMINAL IN, first_end_style: COUNTERSUNK. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-381-8515, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
417012PC2
NSN: 5315-00-381-8515
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_length0.830 INCHES NOMINAL IN
overall_length1.340 INCHES NOMINAL IN
shank_diameter0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
undercut_width0.030 INCHES NOMINAL IN
first_end_styleCOUNTERSUNK
second_end_styleSQUARE
style_designatorUNDERCUT
shoulder_diameter0.380 INCHES NOMINAL IN
undercut_diameter0.248 INCHES NOMINAL IN
first_end_locationCOUNTERSUNK END
first_hole_diameter0.070 INCHES NOMINAL IN
NSN5315-00-381-8515
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 417012PC2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
•
SECOND SHANK DIAMETER: 0.250 INCHES NOMINAL IN
•
UNDERCUT WIDTH: 0.030 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.248 INCHES NOMINAL IN
•
FIRST END COUNTERSINK DIAMETER: 0.234 INCHES NOMINAL IN
•
FIRST END LOCATION: COUNTERSUNK END
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
FIRST END STYLE: COUNTERSUNK
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
SECOND SHANK DIAMETER0.250 INCHES NOMINAL IN
UNDERCUT WIDTH0.030 INCHES NOMINAL IN
UNDERCUT DIAMETER0.248 INCHES NOMINAL IN
FIRST END COUNTERSINK DIAMETER0.234 INCHES NOMINAL IN
FIRST END LOCATIONCOUNTERSUNK END
HOLE ARRANGEMENT STYLEONE END DRILLED
FIRST END STYLECOUNTERSUNK
FIRST HOLE DIAMETER0.070 INCHES NOMINAL IN
SHANK LENGTH0.830 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 417012PC2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 417012PC2?
417012PC2 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 417012PC2?
417012PC2 is cataloged in the U.S. Government catalog under NSN 5315-00-381-8515. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 417012PC2