PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 417-029-016
417-029-016 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410 OVERALL, hole_diameter: 0.377 INCHES MINIMUM AND 0.392 INCHES MAXIMUM IN, outside_diameter: 0.492 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, surface_treatment: PASSIVATE OVERALL, material_thickness: 0.019 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-883-5931, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
417-029-016
NSN: 5310-00-883-5931
FSC: 5310
CAGE: 07421 — L3HARRIS INTERSTATE ELECTRONICS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 410 OVERALL
hole_diameter0.377 INCHES MINIMUM AND 0.392 INCHES MAXIMUM IN
outside_diameter0.492 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
surface_treatmentPASSIVATE OVERALL
material_thickness0.019 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
nondefinitive_spec/std_data410 CLASS
material_document_and_classificationQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-883-5931
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 417-029-016 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.019 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.377 INCHES MINIMUM AND 0.392 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 410 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 410 CLASS
•
OUTSIDE DIAMETER: 0.492 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.019 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
HOLE DIAMETER0.377 INCHES MINIMUM AND 0.392 INCHES MAXIMUM IN
STYLE DESIGNATORFLAT INTERNAL TEETH
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 410 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NONDEFINITIVE SPEC/STD DATA410 CLASS
OUTSIDE DIAMETER0.492 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
12Z3010-256Interchangeable
interchangeable cross-reference
interchangeable
767058Interchangeable
interchangeable cross-reference
interchangeable
10785DC-301Interchangeable
interchangeable cross-reference
interchangeable
172002Interchangeable
interchangeable cross-reference
interchangeable
17200Interchangeable
interchangeable cross-reference
interchangeable
17183 FIND NO. 2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 417-029-016?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 417-029-016?
417-029-016 is a WASHER,LOCK.
What parts can replace 417-029-016?
There are 12 known substitutes for 417-029-016: 12Z3010-256, 767058, 10785DC-301 and 9 more. Substitute compatibility should be verified for your specific system.
Is 417-029-016 still available?
417-029-016 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 417-029-016

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026