The SEMICONDUCTOR DEVICE,THYRISTOR is a the manufacturer industrial component. Key specifications include overall_length: 1.646 INCHES MAXIMUM IN, mounting_method: THREADED STUD(S), special_features: JUNCTION PATTERN ARRANGEMENT: PNPN, features_provided: HERMETICALLY SEALED CASE, nominal_thread_size: 0.250 INCHES IN, internal_configuration: JUNCTION CONTACT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-892-0804, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| overall_length | 1.646 INCHES MAXIMUM IN |
| mounting_method | THREADED STUD(S) |
| special_features | JUNCTION PATTERN ARRANGEMENT: PNPN |
| features_provided | HERMETICALLY SEALED CASE |
| nominal_thread_size | 0.250 INCHES IN |
| internal_configuration | JUNCTION CONTACT |
| semiconductor_material | SILICON |
| thread_series_designator | UNF |
| mounting_facility_quantity | 1 |
| overall_width_across_flats | 0.544 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN |
| terminal_type_and_quantity | 2 TAB, SOLDER LUG AND 1 THREADED STUD |
| specification/standard_data | 81349-MIL-PRF-19500/108 GOVERNMENT SPECIFICATION |
| NSN | 5961-00-892-0804 |
| MAXIMUM OPERATING TEMP PER MEASUREMENT POINT | 125.0 CELSIUS AMBIENT AIR DEGC |
| OVERALL LENGTH | 1.646 INCHES MAXIMUM IN |
| TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG AND 1 THREADED STUD |
| MOUNTING FACILITY QUANTITY | 1 |
| CURRENT RATING PER CHARACTERISTIC | 16.00 AMPERES MAXIMUM AVERAGE ON-STATE CURRENT, 180 DEGREES CONDUCTION ANGLE, AVERAGE OVER A FULL 60-HZ CYCLE |
| SPECIAL FEATURES | JUNCTION PATTERN ARRANGEMENT: PNPN |
| VOLTAGE RATING IN VOLTS PER CHARACTERISTIC | 200.0 MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE AND 300.0 MAXIMUM NONREPETITIVE PEAK REVERSE VOLTAGE AND 5.0 MAXIMUM PEAK GATE VOLTAGE |
| SPECIFICATION/STANDARD DATA | 81349-MIL-PRF-19500/108 GOVERNMENT SPECIFICATION |
| OVERALL WIDTH ACROSS FLATS | 0.544 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |