PartsTable
Technical Data Sheet
Download PDF

416821-123-FM — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

416821-123-FM: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 55.0 MILLIMETERS NOMINAL MM, overall_width: 29.0 MILLIMETERS NOMINAL MM, alignment_type: RIGID, load_direction: RADIAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-282-0445, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
416821-123-FM
NSN: 3110-01-282-0445
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 54ZA4 — ABB MOTORS & MECHANICAL INC (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter55.0 MILLIMETERS NOMINAL MM
overall_width29.0 MILLIMETERS NOMINAL MM
alignment_typeRIGID
load_directionRADIAL
surface_finishGROUND
special_featuresHEAT STABILIZED AT 300 DEGREES F
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter120.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationLOOSE
retainer_fabrication_methodMACHINED
NSN3110-01-282-0445
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 416821-123-FM · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL FIT-UP DESIGNATION: LOOSE
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 120.0 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL FIT-UP DESIGNATIONLOOSE
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH29.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER120.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
ALIGNMENT TYPERIGID
SPECIAL FEATURESHEAT STABILIZED AT 300 DEGREES F
SUBSTITUTES & CROSS-REFERENCES 3
416821-69-FMReference document
Same NSN cross-reference
Reference document — Secondary reference
416821-19-FMReference document
Same NSN cross-reference
Reference document — Secondary reference
55BC03TX30X26Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 416821-123-FM?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 416821-123-FM?
416821-123-FM is a BEARING,BALL,ANNULAR.
What parts can replace 416821-123-FM?
There are 3 known substitutes for 416821-123-FM: 416821-69-FM, 416821-19-FM, 55BC03TX30X26. Substitute compatibility should be verified for your specific system.
What is the NSN for 416821-123-FM?
416821-123-FM is cataloged in the U.S. Government catalog under NSN 3110-01-282-0445. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 416821-123-FM