PartsTable
Technical Data Sheet
41682 ✓ Verified by PartsTable
Lindy · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The CROMO® Slim High Speed HDMI to Micro HDMI Cable with Ethernet is an affordable, high quality cable featuring gold plated contacts for better conductivity and resistance to corrosion and tarnishing.<br><br>This super thin and flexible HDMI cable has been specially designed for connection to devices in confined spaces or with restricted access to the HDMI ports. The slim form factor also reduces the weight of the cable by around 80% compared to the standard CROMO® cables. This makes the cables highly portable and ideal for use with smartphones, tablets, digital cameras, laptops etc.

A tight bend radius and a slim profile also gives these cables the advantage in places where space is limited.<br><br>HDMI ATC (Authorised Test Centre) certified for High Speed Category 2 compliance.<br><br><br><br>Ethernet support allows compatible devices to connect to the internet Low profile, slimline HDMI connectors for easy access to recessed ports Support resolutions up to 1080p and above Supports This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3130-00-715-8070, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
41682
NSN: 3130-00-715-8070
FSC: 3130
CAGE: 43724 — ALFA LAVAL NIAGARA INC. (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING HOUSING
base_length0.9375 INCHES NOMINAL IN
bore_diameter1.0000 INCHES NOMINAL IN
housing_width5.3125 INCHES NOMINAL IN
alignment_typeSELF-ALIGNING
base_thickness0.4375 INCHES NOMINAL IN
housing_height2.8125 INCHES NOMINAL IN
housing_length1.5000 INCHES NOMINAL IN
shaft_end_typeOPEN
style_designatorPILLOW BLOCK, SOLID
features_providedREMOVABLE LINER
mounting_hole_typeSLOTTED
NSN3130-00-715-8070
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 41682 · Lindy ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
HOUSING LENGTH: 1.5000 INCHES NOMINAL IN
LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE: 90.0 DEGREES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 4.3750 INCHES NOMINAL IN
MOUNTING HOLE TYPE: SLOTTED
HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE: 1.5000 INCHES NOMINAL IN
MATERIAL: COPPER ALLOY BEARING
STYLE DESIGNATOR: PILLOW BLOCK, SOLID
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING LENGTH1.5000 INCHES NOMINAL IN
LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE90.0 DEGREES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH4.3750 INCHES NOMINAL IN
MOUNTING HOLE TYPESLOTTED
HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE1.5000 INCHES NOMINAL IN
MATERIALCOPPER ALLOY BEARING
STYLE DESIGNATORPILLOW BLOCK, SOLID
MATERIALSTEEL CORROSION RESISTING HOUSING
BASE THICKNESS0.4375 INCHES NOMINAL IN
MOUNTING SLOT LENGTH0.8750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
20388Interchangeable
interchangeable cross-reference
interchangeable
2121885Interchangeable
interchangeable cross-reference
interchangeable
HW128-11Interchangeable
interchangeable cross-reference
interchangeable
050004Interchangeable
interchangeable cross-reference
interchangeable
17012R1Interchangeable
interchangeable cross-reference
interchangeable
4791Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 41682?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41682?
41682 is a WIRING HARNESS,BRANCHED manufactured by Lindy.
What parts can replace 41682?
There are 13 known substitutes for 41682: 20388, 2121885, HW128-11 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 41682?
41682 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3130-00-715-8070. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 41682