- 24K gold plated contacts with chrome plated connector hoods, fully shielded flexible cable and additional strain relief - Contains active electronics to amplify the HDMI signal for transmission over slimmer cable - Ethernet support allows compatible devices to connect to the internet - Low profile, slimline HDMI connectors for easy access to recessed ports - Support resolutions up to 1080p and above - Supports 3D 1080p - Supports HDCP - Full support for HEC, ARC and CEC compliant devices - Deep colour capable - supports over 1 billion colours; x.v.Color and xvYCC ready - Very compact connector size - ideal for use with recessed HDMI sockets This part is cataloged in the U.S. Government catalog under NSN 5950-00-072-7034, indicating validated use in U.S. government and defense logistics supply chains.
WHERE IT FITS
MRO→MRO_GENERAL→41673
NSN:5950-00-072-7034 NIINs:000727034, 001183774, 006067013, 012233022, 013103078 FSC:5950 — Coils and Transformers CAGE:22558 — COAST/ADVANCED CHIP MAGNETICS, INC. (USA)
SPECIFICATIONS
material
COPPER ALLOY
body_width
0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
body_height
0.055 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
body_length
0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
gear_material
STEEL COMP E9310
terminal_type
WIRE LEAD
inclosure_type
ENCAPSULATED
overall_length
0.617 INCHES NOMINAL IN
shaft_material
STEEL COMP E9310
teeth_quantity
14
mounting_method
CORE AND THREADED STUD(S) SINGLE GROUP
terminal_length
0.375 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
NSN
5950-00-072-7034
COMPONENT DIAGRAM
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 1 SINGLE GROUP
•
INCLOSURE TYPE: HERMETICALLY SEALED
•
BODY OUTSIDE DIAMETER: 1.088 INCHES MAXIMUM IN
•
MOUNTING METHOD: CORE AND THREADED STUD(S) SINGLE GROUP
•
WINDING FUNCTION AND QUANTITY: 1 PRIMARY AND 2 SECONDARY SINGLE COMPONENT
•
IMPEDANCE RATING IN OHMS: 600.0 NOMINAL SINGLE COMPONENT SINGLE PRIMARY
•
WINDING SHIELDING METHOD: INTERNAL SHIELD GROUNDED TO INCLOSURE SINGLE COMPONENT
TYPICAL APPLICATIONS
Long-term data archival and compliance retention
Offsite backup and disaster recovery
Air-gapped ransomware protection
Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY
1 SINGLE GROUP
INCLOSURE TYPE
HERMETICALLY SEALED
BODY OUTSIDE DIAMETER
1.088 INCHES MAXIMUM IN
MOUNTING METHOD
CORE AND THREADED STUD(S) SINGLE GROUP
WINDING FUNCTION AND QUANTITY
1 PRIMARY AND 2 SECONDARY SINGLE COMPONENT
IMPEDANCE RATING IN OHMS
600.0 NOMINAL SINGLE COMPONENT SINGLE PRIMARY
IMPEDANCE RATING IN OHMS
600.0 NOMINAL SINGLE COMPONENT ALL SECONDARY
WINDING SHIELDING METHOD
INTERNAL SHIELD GROUNDED TO INCLOSURE SINGLE COMPONENT
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41673?
41673 is a TERMINAL,TAPER PIN,ELECTRICAL manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).
What parts can replace 41673?
There are 4 known substitutes for 41673: 124A58, 677-0162-000, TS-40469 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 41673?
41673 is cataloged in the U.S. Government catalog under NSN 5950-00-072-7034. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.