PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 41663
41663 ✓ Verified by PartsTable
Lindy · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

<b>High quality, ultra flexible and light HDMI cable!</b><br><br>- 4mm super thin cable construction with highly flexible outer jacket<br>- Contains active electronics to amplify the HDMI signal for transmission over slimmer cable<br>- Low profile, slimline HDMI connectors for easy access to recessed ports<br>- ATC (Authorised Test Centre) certified for High Speed HDMI with Ethernet<br>- Shielded cable construction for optimum RF and EMI protection<br>- Supports resolutions up to 1080p and higher, multi channel audio<br>- 3D over HDMI ready<br>- Deep colour capable - supports over 1 billion colours; x.v.Color and xvYCC ready This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-072-4114, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
41663
NSN: 5310-00-072-4114
FSC: 5310
CAGE: 57712 — TELEMECHANICS INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY
thickness0.032 INCHES NOMINAL IN
body_width0.245 INCHES MINIMUM AND 0.271 INCHES MAXIMUM IN
body_height0.185 INCHES MAXIMUM IN
body_length0.755 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN
hole_diameter0.188 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
memory_capacityUNKNOWN
mounting_methodPLUG-IN SINGLE GROUP
frequency_rating4.8 KILOHERTZ MAXIMUM SINGLE COMPONENT
outside_diameter3.369 INCHES NOMINAL IN
overall_diameter0.375 INCHES NOMINAL IN
NSN5310-00-072-4114
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 41663 · Lindy ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
THICKNESS: 0.032 INCHES NOMINAL IN
•
OVERALL DIAMETER: 0.375 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
HOLE DIAMETER: 0.188 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
THICKNESS0.032 INCHES NOMINAL IN
OVERALL DIAMETER0.375 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
677-0390-010Interchangeable
interchangeable cross-reference
interchangeable
526-0299-010Interchangeable
interchangeable cross-reference
interchangeable
41663Interchangeable
interchangeable cross-reference
interchangeable
2091758-3Interchangeable
interchangeable cross-reference
interchangeable
2664889-1Interchangeable
interchangeable cross-reference
interchangeable
1734-1663Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 41663?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41663?
41663 is a TERMINAL,TAPER PIN,ELECTRICAL manufactured by Lindy.
What parts can replace 41663?
There are 10 known substitutes for 41663: 677-0390-010, 526-0299-010, 41663 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 41663?
41663 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-072-4114. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 41663

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026