PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 416362
416362 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT B, case_style: SQUARE, seal_width: 0.625 INCHES NOMINAL IN, housing_bore_diameter: 8.010 INCHES NOMINAL IN, sealing_element_style: ANGULAR-OPPOSED, accommodated_shaft_diameter: 6.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-946-7861, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
416362
NSN: 5330-00-946-7861
FSC: 5330
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT B
case_styleSQUARE
seal_width0.625 INCHES NOMINAL IN
housing_bore_diameter8.010 INCHES NOMINAL IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter6.750 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-00-946-7861
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 416362 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.625 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 8.010 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR-OPPOSED
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.625 INCHES NOMINAL IN
HOUSING BORE DIAMETER8.010 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR-OPPOSED
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
CASE STYLESQUARE
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
ACCOMMODATED SHAFT DIAMETER6.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
10072Interchangeable
interchangeable cross-reference
interchangeable
S6316KInterchangeable
interchangeable cross-reference
interchangeable
S6316JInterchangeable
interchangeable cross-reference
interchangeable
H543-32Interchangeable
interchangeable cross-reference
interchangeable
905543-32Interchangeable
interchangeable cross-reference
interchangeable
4917-32Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 416362?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 416362?
416362 is a SEAL,PLAIN ENCASED.
What parts can replace 416362?
There are 8 known substitutes for 416362: 10072, S6316K, S6316J and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 416362?
416362 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-946-7861. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 416362

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026