PartsTable
Technical Data Sheet
Download PDF

416080-D — ROD,STRAIGHT,HEADLESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

416080-D: ROD,STRAIGHT,HEADLESS.

The ROD,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, chamfer_angle: 45.0 DEGREES NOMINAL ALL ENDS, hole_diameter: 4.0 MILLIMETERS ALL ENDS MM, chamfer_length: 2.0 MILLIMETERS NOMINAL ALL ENDS MM, overall_length: 336.0 MILLIMETERS NOMINAL MM, overall_diameter: 16.0 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-619-0307, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
416080-D
NSN: 5340-01-619-0307
FSC: 5340 — Hardware, Commercial
CAGE: 5PFF0 — HYDREMA U.S., INC. DBA HYDREMA US INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
chamfer_angle45.0 DEGREES NOMINAL ALL ENDS
hole_diameter4.0 MILLIMETERS ALL ENDS MM
chamfer_length2.0 MILLIMETERS NOMINAL ALL ENDS MM
overall_length336.0 MILLIMETERS NOMINAL MM
overall_diameter16.0 MILLIMETERS NOMINAL MM
drilled_hole_locationBOTH ENDS
end_item_identification2355-22-622-7966
distance_from_end_to_hole_center6.0 MILLIMETERS NOMINAL ALL ENDS MM
NSN5340-01-619-0307
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 416080-D MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 2.0 MILLIMETERS NOMINAL ALL ENDS MM
•
OVERALL DIAMETER: 16.0 MILLIMETERS NOMINAL MM
•
DRILLED HOLE LOCATION: BOTH ENDS
•
HOLE DIAMETER: 4.0 MILLIMETERS ALL ENDS MM
•
CHAMFER ANGLE: 45.0 DEGREES NOMINAL ALL ENDS
•
DISTANCE FROM END TO HOLE CENTER: 6.0 MILLIMETERS NOMINAL ALL ENDS MM
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH2.0 MILLIMETERS NOMINAL ALL ENDS MM
OVERALL DIAMETER16.0 MILLIMETERS NOMINAL MM
DRILLED HOLE LOCATIONBOTH ENDS
OVERALL LENGTH336.0 MILLIMETERS NOMINAL MM
HOLE DIAMETER4.0 MILLIMETERS ALL ENDS MM
CHAMFER ANGLE45.0 DEGREES NOMINAL ALL ENDS
DISTANCE FROM END TO HOLE CENTER6.0 MILLIMETERS NOMINAL ALL ENDS MM
END ITEM IDENTIFICATION2355-22-622-7966
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 416080-D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 416080-D?
416080-D is a ROD,STRAIGHT,HEADLESS.
What is the NSN for 416080-D?
416080-D is cataloged in the U.S. Government catalog under NSN 5340-01-619-0307. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 416080-D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.