PartsTable
Technical Data Sheet
415254 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include seal_width: 7.16 INCHES NOMINAL IN, outside_diameter: 4.003 INCHES NOMINAL IN, end_item_identification: AIR ROUTE SURVEILLANCE RADAR, OVERHAUL, cross-sectional_shape_style: DUAL LIP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-649-7306, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
415254
NSN: 5330-01-649-7306
FSC: 5330
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
seal_width7.16 INCHES NOMINAL IN
outside_diameter4.003 INCHES NOMINAL IN
special_featuresTHIS OIL SEAL IS FOR THE NEW CARSR ANTENNA DRIVE MOTOR USED ON THE FPS SYSTEMS. IT IS RUBBER OIL/GREASE SEAL, 2.250" ID, 4.003" OD, 7.16" WIDTH, DUAL LIP
end_item_identificationAIR ROUTE SURVEILLANCE RADAR, OVERHAUL
cross-sectional_shape_styleDUAL LIP
NSN5330-01-649-7306
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 415254 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL SHAPE STYLE: DUAL LIP
OUTSIDE DIAMETER: 4.003 INCHES NOMINAL IN
SEAL WIDTH: 7.16 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEDUAL LIP
OUTSIDE DIAMETER4.003 INCHES NOMINAL IN
END ITEM IDENTIFICATIONAIR ROUTE SURVEILLANCE RADAR, OVERHAUL
SEAL WIDTH7.16 INCHES NOMINAL IN
SPECIAL FEATURESTHIS OIL SEAL IS FOR THE NEW CARSR ANTENNA DRIVE MOTOR USED ON THE FPS SYSTEMS. IT IS RUBBER OIL/GREASE SEAL, 2.250" ID, 4.003" OD, 7.16" WIDTH, DUAL LIP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
282Interchangeable
interchangeable cross-reference
interchangeable
E1145-6-1Interchangeable
interchangeable cross-reference
interchangeable
22647Interchangeable
interchangeable cross-reference
interchangeable
36990Interchangeable
interchangeable cross-reference
interchangeable
7068Interchangeable
interchangeable cross-reference
interchangeable
7864Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 415254?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 415254?
415254 is a SEAL,PLAIN.
What parts can replace 415254?
There are 8 known substitutes for 415254: 282, E1145-6-1, 22647 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 415254?
415254 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-649-7306. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 415254