PartsTable
Technical Data Sheet
Download PDF

415248 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

415248: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT A, case_style: RECESSED, seal_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, housing_bore_diameter: 3.528 INCHES MINIMUM AND 3.558 INCHES MAXIMUM IN, sealing_element_style: ANGULAR-OPPOSED, accommodated_shaft_diameter: 2.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-024-3346, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
415248
NSN: 5330-01-024-3346
FSC: 5330 — Packing and Gasket Materials
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT A
case_styleRECESSED
seal_width0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
housing_bore_diameter3.528 INCHES MINIMUM AND 3.558 INCHES MAXIMUM IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter2.375 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-01-024-3346
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 415248 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR-OPPOSED
•
HOUSING BORE DIAMETER: 3.528 INCHES MINIMUM AND 3.558 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT DIAMETER: 2.375 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR-OPPOSED
HOUSING BORE DIAMETER3.528 INCHES MINIMUM AND 3.558 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
CASE STYLERECESSED
ACCOMMODATED SHAFT DIAMETER2.375 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
SUBSTITUTES & CROSS-REFERENCES 5
230954Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
205035Reference document
Same NSN cross-reference
Reference document — Secondary reference
D77023Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
3W0043Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
415248RSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 415248?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 415248?
415248 is a SEAL,PLAIN ENCASED.
What parts can replace 415248?
There are 5 known substitutes for 415248: 230954, 205035, D77023 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 415248?
415248 is cataloged in the U.S. Government catalog under NSN 5330-01-024-3346. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 415248

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.