PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 415-1280-02-12
415-1280-02-12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, overall_length: 3.250 INCHES NOMINAL IN, handle_clearance: 1.250 INCHES NOMINAL IN, surface_treatment: OXIDE OVERALL, nominal_thread_size: 0.164 INCHES IN, thread_series_designator: UNIFIED NATIONAL COARSE (UNC). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-433-3993, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
415-1280-02-12
NSN: 5340-00-433-3993
FSC: 5340
CAGE: 71279 — INTERCONNECTION PRODUCTS INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
overall_length3.250 INCHES NOMINAL IN
handle_clearance1.250 INCHES NOMINAL IN
surface_treatmentOXIDE OVERALL
nominal_thread_size0.164 INCHES IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
mounting_facility_quantity2
center_to_center_distance_between_mounting_facilities_parallel_to_length3.000 INCHES NOMINAL IN
NSN5340-00-433-3993
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 415-1280-02-12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HANDLE CLEARANCE: 1.250 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 3.000 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
•
MOUNTING FACILITY QUANTITY: 2
•
SURFACE TREATMENT: OXIDE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HANDLE CLEARANCE1.250 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD SIZE0.164 INCHES IN
OVERALL LENGTH3.250 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH3.000 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
MOUNTING FACILITY QUANTITY2
SURFACE TREATMENTOXIDE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
12812Upgraded Successor
successor cross-reference
successor
F3889Interchangeable
interchangeable cross-reference
interchangeable
006A136AInterchangeable
interchangeable cross-reference
interchangeable
2036NInterchangeable
interchangeable cross-reference
interchangeable
SI-0236Interchangeable
interchangeable cross-reference
interchangeable
G560Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 415-1280-02-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 415-1280-02-12?
415-1280-02-12 is a HANDLE,BOW.
What parts can replace 415-1280-02-12?
There are 12 known substitutes for 415-1280-02-12: 12812, F3889, 006A136A and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 415-1280-02-12?
415-1280-02-12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-433-3993. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 415-1280-02-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026