PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 415-1280-01-12
415-1280-01-12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, overall_length: 2.250 INCHES NOMINAL IN, handle_clearance: 1.250 INCHES NOMINAL IN, surface_treatment: OXIDE OVERALL, nominal_thread_size: 0.164 INCHES IN, thread_series_designator: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-433-3992, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
415-1280-01-12
NSN: 5340-00-433-3992
FSC: 5340
CAGE: 71279 — INTERCONNECTION PRODUCTS INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
overall_length2.250 INCHES NOMINAL IN
handle_clearance1.250 INCHES NOMINAL IN
surface_treatmentOXIDE OVERALL
nominal_thread_size0.164 INCHES IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
mounting_facility_quantity2
center_to_center_distance_between_mounting_facilities_parallel_to_length2.000 INCHES NOMINAL IN
NSN5340-00-433-3992
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 415-1280-01-12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
MOUNTING FACILITY QUANTITY: 2
•
MATERIAL: COPPER ALLOY OVERALL
•
SURFACE TREATMENT: OXIDE OVERALL
•
HANDLE CLEARANCE: 1.250 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD SIZE0.164 INCHES IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
MOUNTING FACILITY QUANTITY2
MATERIALCOPPER ALLOY OVERALL
SURFACE TREATMENTOXIDE OVERALL
OVERALL LENGTH2.250 INCHES NOMINAL IN
HANDLE CLEARANCE1.250 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH2.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
GGG-C-755Interchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE 25Interchangeable
interchangeable cross-reference
interchangeable
MS15701-102Interchangeable
interchangeable cross-reference
interchangeable
A12802Interchangeable
interchangeable cross-reference
interchangeable
12802Interchangeable
interchangeable cross-reference
interchangeable
GGG-T-60 TY1SEBST2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 415-1280-01-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 415-1280-01-12?
415-1280-01-12 is a HANDLE,BOW.
What parts can replace 415-1280-01-12?
There are 12 known substitutes for 415-1280-01-12: GGG-C-755, B94.19 TABLE 25, MS15701-102 and 9 more. Substitute compatibility should be verified for your specific system.
Is 415-1280-01-12 still available?
415-1280-01-12 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 415-1280-01-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026