PartsTable
Technical Data Sheet
Download PDF

414765-22 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

414765-22: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.390 INCHES NOMINAL IN, height: 0.156 INCHES NOMINAL IN, length: 0.320 INCHES NOMINAL IN, material: STEEL COMP 316 AND PLASTIC, thread_class: 2A A, nominal_thread_size: 0.112 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-911-8912, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
414765-22
NSN: 5340-00-911-8912
FSC: 5340 — Hardware, Commercial
CAGE: 96214 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
width0.390 INCHES NOMINAL IN
height0.156 INCHES NOMINAL IN
length0.320 INCHES NOMINAL IN
materialSTEEL COMP 316 AND PLASTIC
thread_class2A A
nominal_thread_size0.112 INCHES IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5340-00-911-8912
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 414765-22 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.320 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
HEIGHT: 0.156 INCHES NOMINAL IN
•
WIDTH: 0.390 INCHES NOMINAL IN
•
THREAD CLASS: 2A A
•
MATERIAL: STEEL COMP 316 AND PLASTIC
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS
LENGTH0.320 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.112 INCHES IN
HEIGHT0.156 INCHES NOMINAL IN
WIDTH0.390 INCHES NOMINAL IN
THREAD CLASS2A A
MATERIALSTEEL COMP 316 AND PLASTIC
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
500755-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 414765-22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 414765-22?
414765-22 is a CLAMP,SYNCHRO.
What parts can replace 414765-22?
There is 1 known substitute for 414765-22: 500755-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 414765-22?
414765-22 is cataloged in the U.S. Government catalog under NSN 5340-00-911-8912. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 414765-22

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.