PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 414765-15
414765-15 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.385 INCHES NOMINAL IN, height: 0.133 INCHES NOMINAL IN, length: 0.308 INCHES NOMINAL IN, material: STEEL COMP 316, hole_diameter: 0.112 INCHES NOMINAL IN, material_document_and_classification: AISI ASSN STD SINGLE MATERIAL RESPONSE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-229-0225, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
414765-15
NSN: 5340-00-229-0225
FSC: 5340
CAGE: 96214 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
width0.385 INCHES NOMINAL IN
height0.133 INCHES NOMINAL IN
length0.308 INCHES NOMINAL IN
materialSTEEL COMP 316
hole_diameter0.112 INCHES NOMINAL IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-229-0225
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 414765-15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 316
•
HEIGHT: 0.133 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.112 INCHES NOMINAL IN
•
LENGTH: 0.308 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE
•
WIDTH: 0.385 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 316
HEIGHT0.133 INCHES NOMINAL IN
HOLE DIAMETER0.112 INCHES NOMINAL IN
LENGTH0.308 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE
WIDTH0.385 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
5000-12Interchangeable
interchangeable cross-reference
interchangeable
SM-C-879285Interchangeable
interchangeable cross-reference
interchangeable
109064-537Interchangeable
interchangeable cross-reference
interchangeable
2046345-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 414765-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 414765-15?
414765-15 is a CLAMP,SYNCHRO.
What parts can replace 414765-15?
There are 4 known substitutes for 414765-15: 5000-12, SM-C-879285, 109064-537 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 414765-15?
414765-15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-229-0225. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 414765-15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026