PartsTable
Technical Data Sheet
Download PDF

41448 — SCREW,MACHINE

✓ Government record, cited
Lindy · NUT WASHER
PRODUCT OVERVIEW

41448: SCREW,MACHINE.

- Features 'locking' pins on the connectors which create a friction fit into any standard HDMI port and provide increased stability and resistance to removal - 24K gold plated contacts with chrome plated connector hoods, fully shielded cable and additional strain relief - Supports resolutions up to 4 x higher than 1080p - Full support for HEC, ARC and CEC compliant devices - Very compact connector size - ideal for use with recessed HDMI sockets The LINDY CROMO HDMI Cable with Ethernet is a superb, high quality cable, ideal for use with Sky HD, PS3, Blu-Ray, HDTV and home cinema installations. It provides premium quality cable construction at an affordable price and features 24K gold plated contacts for optimum conductive ability and resistance to tarnishing and corrosion. The connector design features unique friction locking pins which provide a more secure fit in any standard HDMI socket.

This part is cataloged in the U.S. Government catalog under NSN 5315-00-378-3142, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
41448
NSN: 5315-00-378-3142
NIINs: 003783142, 015020492
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 97907 — TEREX CORP (USA)
SPECIFICATIONS
end_item_identificationCPX 610
NSN5315-00-378-3142
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 41448 · Lindy ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST STEP DIAMETER: 0.431 INCHES MINIMUM AND 0.436 INCHES MAXIMUM IN
•
UNDER HEAD LENGTH: 1.062 INCHES NOMINAL IN
•
FIRST END STYLE: SQUARE
•
SECOND STEP LENGTH: 0.693 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SHOULDER
•
PIN HEAD DIAMETER: 0.748 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HEAD STYLE: FLAT
TECHNICAL CHARACTERISTICS
FIRST STEP DIAMETER0.431 INCHES MINIMUM AND 0.436 INCHES MAXIMUM IN
UNDER HEAD LENGTH1.062 INCHES NOMINAL IN
FIRST END STYLESQUARE
SECOND STEP LENGTH0.693 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
STYLE DESIGNATORSHOULDER
PIN HEAD DIAMETER0.748 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLEFLAT
SECOND STEP DIAMETER0.370 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
HEIGHT0.109 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
5453FReference document
Same NSN cross-reference
Reference document — Secondary reference
1370Reference document
Same NSN cross-reference
Reference document — Secondary reference
2274165Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 41448?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41448?
41448 is a SCREW,MACHINE manufactured by Lindy.
What parts can replace 41448?
There are 3 known substitutes for 41448: 5453F, 1370, 2274165. Substitute compatibility should be verified for your specific system.
What is the NSN for 41448?
41448 is cataloged in the U.S. Government catalog under NSN 5315-00-378-3142. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 41448