PartsTable
Technical Data Sheet
Download PDF

4141471P1 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4141471P1: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 65.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, center_hole_diameter: 0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-584-1100, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4141471P1
NSN: 5331-00-584-1100
FSC: 5331 — O-ring
CAGE: 24446 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating65.0 SHORE DUROMETER A NOMINAL
outside_diameter0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
center_hole_diameter0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-584-1100
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4141471P1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
HARDNESS RATING65.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 8
67G190-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
182497Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
200-0224-000Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
204800Reference document
Same NSN cross-reference
Reference document — Secondary reference
5330005841100Reference document
Same NSN cross-reference
Reference document — Secondary reference
PRP568-006-4024-65Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 4141471P1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4141471P1?
4141471P1 is a O-RING.
What parts can replace 4141471P1?
There are 8 known substitutes for 4141471P1: 67G190-1, 182497, 200-0224-000 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4141471P1?
4141471P1 is cataloged in the U.S. Government catalog under NSN 5331-00-584-1100. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4141471P1