PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 414-9-6
414-9-6 ✓ Verified by PartsTable
Lindy · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

<b>Easily connect a computer with a Mini DisplayPort output to a DVI-D display</b><br>- Supports Video-Mirroring & Extended desktop modes<br>- For use with Mini DisplayPort equipped computers<br>- Mini DisplayPort supports resolutions up to 1920 x 1200<br>- Length: 2m (approx)<br>- Colour: White This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-7499, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
414-9-6
NSN: 5340-00-200-7499
FSC: 5340
CAGE: 83930 — TRANSDIGM INC DBA ADEL WIGGINS GROUP DIV ADEL WIGGINS (USA)
SPECIFICATIONS
colorSILVER OVERALL
diameter0.192 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
materialSTEEL
body_width1.150 INCHES MAXIMUM IN
body_height1.390 INCHES MAXIMUM IN
body_length1.800 INCHES MAXIMUM IN
hole_diameter0.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width0.938 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
overall_length1.188 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S) SINGLE GROUP
frequency_rating400.0 HERTZ NOMINAL SINGLE COMPONENT
NSN5340-00-200-7499
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 414-9-6 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER CUSHION
•
CUSHIONING ENVIRONMENTAL PROTECTION: OIL RESISTANT
•
STYLE DESIGNATOR: SINGLE LOOP
•
SURFACE TREATMENT: CHROMATE ZINC AND ZINC BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.531 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER CUSHION
CUSHIONING ENVIRONMENTAL PROTECTIONOIL RESISTANT
MATERIALRUBBER CUSHION
STYLE DESIGNATORSINGLE LOOP
SURFACE TREATMENTCHROMATE ZINC AND ZINC BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.531 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
SURFACE TREATMENTCHROMATE ZINC AND ZINC BAND
LOOP INSIDE DIAMETER0.563 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
22065BInterchangeable
interchangeable cross-reference
interchangeable
22065Interchangeable
interchangeable cross-reference
interchangeable
376MEH1Interchangeable
interchangeable cross-reference
interchangeable
BX-9573Interchangeable
interchangeable cross-reference
interchangeable
PEI 6836Interchangeable
interchangeable cross-reference
interchangeable
767446-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 414-9-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 414-9-6?
414-9-6 is a SLEEVE,DIRECTIONAL CONTROL LINEA manufactured by Lindy.
What parts can replace 414-9-6?
There are 11 known substitutes for 414-9-6: 22065B, 22065, 376MEH1 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 414-9-6?
414-9-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-7499. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 414-9-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026