PartsTable
Technical Data Sheet
Download PDF

413170-2-ITEM 43 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

413170-2-ITEM 43: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL ROLLER, bore_diameter: 1.0000 INCHES NOMINAL IN, overall_width: 0.7500 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OIL HOLE AND GROOVE IN OUTER RING,MFR STANDARD RETAINER. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-227-3240, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
413170-2-ITEM 43
NSN: 3110-00-227-3240
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 82366 — AERO-MOTIVE COMPANY (USA)
SPECIFICATIONS
materialSTEEL ROLLER
bore_diameter1.0000 INCHES NOMINAL IN
overall_width0.7500 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOIL HOLE AND GROOVE IN OUTER RING,MFR STANDARD RETAINER
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
overall_outside_diameter1.5000 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-227-3240
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 413170-2-ITEM 43 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
OVERALL OUTSIDE DIAMETER: 1.5000 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
OVERALL WIDTH0.7500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.5000 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESOIL HOLE AND GROOVE IN OUTER RING,MFR STANDARD RETAINER
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER1.0000 INCHES NOMINAL IN
MATERIALSTEEL OUTER RING
SUBSTITUTES & CROSS-REFERENCES 7
SJ7193Reference document
Same NSN cross-reference
Reference document — Secondary reference
67X17Reference document
Same NSN cross-reference
Reference document — Secondary reference
2273240Reference document
Same NSN cross-reference
Reference document — Secondary reference
T001129414Reference document
Same NSN cross-reference
Reference document — Secondary reference
A17986Reference document
Same NSN cross-reference
Reference document — Secondary reference
214988Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 413170-2-ITEM 43?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 413170-2-ITEM 43?
413170-2-ITEM 43 is a BEARING,ROLLER,NEEDLE.
What parts can replace 413170-2-ITEM 43?
There are 7 known substitutes for 413170-2-ITEM 43: SJ7193, 67X17, 2273240 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 413170-2-ITEM 43?
413170-2-ITEM 43 is cataloged in the U.S. Government catalog under NSN 3110-00-227-3240. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 413170-2-ITEM 43

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.