PartsTable
Technical Data Sheet
PartsTable / MRO / 41313
41313 ✓ Verified by PartsTable
Dujardin · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- ATC (Authorised Test Centre) certified for high speed<br>- HDMI Male to HDMI Female connectors<br>- 24K gold plated contacts<br>- Fully shielded cable construction for optimum RF and EMI protection<br>- Supports resolutions up to 1080p and higher, multi channel audio<br>- 3D over HDMI ready<br>- Deep colour capable - supports over 1 billion colours; x.v.Color and xvYCC ready<br>- Low profile design, ideal for recessed connectors<br>- Stranded core construction This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6794, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 41313
NSN: 3110-00-155-6794
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
length10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
materialSTEEL ALLOY OVERALL
bore_shapeSTRAIGHT
point_typeSPLIT
body_length0.550 INCHES MAXIMUM IN
point_angle135.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length1.125 INCHES NOMINAL IN
usage_designINDOOR
arrester_typeCARBON BLOCK
bore_diameter65.00 MILLIMETERS NOMINAL MM
leg_thickness0.062 INCHES NOMINAL IN
NSN3110-00-155-6794
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 41313 · Dujardin ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: RADIAL
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL OUTER RING
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
FEATURES PROVIDED: SNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
MATERIALSTEEL OUTER RING
MATERIALSTEEL BALL
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL INNER RING
FEATURES PROVIDEDSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
OVERALL WIDTH33.0 MILLIMETERS NOMINAL MM
INTERNAL FIT-UP DESIGNATIONSTANDARD
STANDARD TOLERANCE DESIGNATIONABEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
4557-4Interchangeable
interchangeable cross-reference
interchangeable
3029758-5Interchangeable
interchangeable cross-reference
interchangeable
810-10Interchangeable
interchangeable cross-reference
interchangeable
313KGInterchangeable
interchangeable cross-reference
interchangeable
313SGInterchangeable
interchangeable cross-reference
interchangeable
P37792Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 41313?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41313?
41313 is a SHAFT ASSEMBLY,FLEXIBLE manufactured by Dujardin. It is classified as a MRO (MRO_GENERAL).
What parts can replace 41313?
There are 29 known substitutes for 41313: 4557-4, 3029758-5, 810-10 and 26 more. Substitute compatibility should be verified for your specific system.
Is 41313 still available?
41313 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 41313

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026