Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW
<b>The all-in-one solution for extending DVI!</b><br>Our Fibre Optic DVI-D cables are the easy solution for extending DVI digital signals over incredible distances. The fibre-optic technology used allows transmission distances that far exceed the maximum supported by standard copper-based cables.<br>These cables are a hybrid design which feature H-PCF (Hard-Polymer Clad Fibre) glass fibres for the digital display signals and copper wires for the DDC / HDCP control signals. The Transmitter and Receiver modules are each equipped with standard DVI-D Male connectors for connecting to the source (e.g.
DVI graphics card) and the display. The modules are connected together by the combined fibre optic and copper cable. This integrated design makes for true 'Plug & Play' operation.<br>- Extends digital display signals with absolutely no degradation;<br>- Built-in connector design allows direct connection to source and display;<br>- Supports DVI-D single link display resolutions of up to 1920 x This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5945-00-260-2619, indicating validated use in U.S.
government and defense logistics supply chains.
WHERE IT FITS
MRO→MRO_GENERAL→4130-1
NSN:5945-00-260-2619 FSC:5945 CAGE:29597 — TAYLOR MADE ENVIRONMENTAL (USA)
SPECIFICATIONS
material
CHROMIUM BODY
top_till
NOT PROVIDED
duty_type
CONTINUOUS
body_width
1.580 INCHES NOMINAL IN
body_height
2.500 INCHES NOMINAL IN
body_length
1.790 INCHES NOMINAL IN
panel_front
NOT PROVIDED
thread_class
2B SINGLE MOUNTING FACILITY
coil_quantity
1
overall_width
8.000 INCHES NOMINAL IN
inclosure_type
FULLY INCLOSED
overall_height
9.000 INCHES NOMINAL IN
NSN
5945-00-260-2619
COMPONENT DIAGRAM
KEY FEATURES
•
WINDING DC RESISTANCE RATING: 40.0 OHMS NOMINAL SINGLE WINDING
•
DUTY TYPE: CONTINUOUS
•
MOUNTING FACILITY PATTERN: IN-LINE SINGLE MOUNTING FACILITY
•
NOMINAL THREAD SIZE: 0.099 INCHES SINGLE MOUNTING FACILITY IN
•
THREAD CLASS: 2B SINGLE MOUNTING FACILITY
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC) SINGLE MOUNTING FACILITY
•
COIL QUANTITY: 1
•
THREAD QUANTITY PER INCH: 48 SINGLE MOUNTING FACILITY
TECHNICAL CHARACTERISTICS (FLIS)
WINDING DC RESISTANCE RATING
40.0 OHMS NOMINAL SINGLE WINDING
DUTY TYPE
CONTINUOUS
MOUNTING FACILITY PATTERN
IN-LINE SINGLE MOUNTING FACILITY
NOMINAL THREAD SIZE
0.099 INCHES SINGLE MOUNTING FACILITY IN
THREAD CLASS
2B SINGLE MOUNTING FACILITY
THREAD SERIES DESIGNATOR
UNIFIED NATIONAL COARSE (UNC) SINGLE MOUNTING FACILITY
COIL QUANTITY
1
THREAD QUANTITY PER INCH
48 SINGLE MOUNTING FACILITY
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4130-1?
4130-1 is a INTERRUPTER,GROUND FAULT manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).
What parts can replace 4130-1?
There are 20 known substitutes for 4130-1: CCB4004-1, 1208803H1, 1115202 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4130-1?
4130-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5945-00-260-2619. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.