PartsTable
Technical Data Sheet
Download PDF

413-1048 — BOLT,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

413-1048: BOLT,MACHINE.

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.500 INCHES MINIMUM IN, fastener_length: 2.900 INCHES MINIMUM AND 3.080 INCHES MAXIMUM IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-128-5100, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
413-1048
NSN: 5306-01-128-5100
FSC: 5306 — Bolts
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
thread_class2A A
thread_length1.500 INCHES MINIMUM IN
fastener_length2.900 INCHES MINIMUM AND 3.080 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
width_between_flats0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
nominal_thread_diameter0.625 INCHES IN
thread_quantity_per_inch11
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5306-01-128-5100
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 413-1048 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
•
FASTENER LENGTH: 2.900 INCHES MINIMUM AND 3.080 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.500 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
FEATURES PROVIDED: FINISHED HEAD
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
FASTENER LENGTH2.900 INCHES MINIMUM AND 3.080 INCHES MAXIMUM IN
THREAD LENGTH1.500 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.625 INCHES IN
FEATURES PROVIDEDFINISHED HEAD
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
THREAD CLASS2A A
THREAD QUANTITY PER INCH11
SUBSTITUTES & CROSS-REFERENCES 2
113-601Reference document
Same NSN cross-reference
Reference document — Secondary reference
2K4325Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 413-1048?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 413-1048?
413-1048 is a BOLT,MACHINE.
What parts can replace 413-1048?
There are 2 known substitutes for 413-1048: 113-601, 2K4325. Substitute compatibility should be verified for your specific system.
What is the NSN for 413-1048?
413-1048 is cataloged in the U.S. Government catalog under NSN 5306-01-128-5100. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 413-1048