PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 41291-100
41291-100 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,FLUSH is a the manufacturer industrial component. Key specifications include width: 1.440 INCHES NOMINAL IN, length: 2.150 INCHES NOMINAL IN, style_designator: FLUSH LEVER ACTUATOR, features_provided: BOLT AND SPRING, mounting_hole_diameter: 0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN, material_document_and_classification: UNABLE TO DECODE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-024-6709, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
41291-100
NSN: 5340-00-024-6709
FSC: 5340
CAGE: 32707 — TELAIR INTERNATIONAL INCORPORATED DBA NORDISK AVIATION PRODUCTS (USA)
SPECIFICATIONS
width1.440 INCHES NOMINAL IN
length2.150 INCHES NOMINAL IN
style_designatorFLUSH LEVER ACTUATOR
features_providedBOLT AND SPRING
mounting_hole_diameter0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
material_document_and_classificationUNABLE TO DECODE
center_to_center_distance_between_mounting_holes_along_width1.062 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_length1.125 INCHES NOMINAL IN
NSN5340-00-024-6709
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 41291-100 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 1.440 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 1.062 INCHES NOMINAL IN
•
FEATURES PROVIDED: BOLT AND SPRING
•
MOUNTING HOLE DIAMETER: 0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 1.125 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
LENGTH: 2.150 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLUSH LEVER ACTUATOR
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH1.440 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH1.062 INCHES NOMINAL IN
FEATURES PROVIDEDBOLT AND SPRING
MOUNTING HOLE DIAMETER0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH1.125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
LENGTH2.150 INCHES NOMINAL IN
STYLE DESIGNATORFLUSH LEVER ACTUATOR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
41291-00Interchangeable
interchangeable cross-reference
interchangeable
41291Interchangeable
interchangeable cross-reference
interchangeable
H2331-1-100Interchangeable
Same NIIN cross-reference
interchangeable
GL510AP100Interchangeable
Same NIIN cross-reference
interchangeable
GL510AR6-31Interchangeable
Same NIIN cross-reference
interchangeable
41940-6-31Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 41291-100?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41291-100?
41291-100 is a CATCH,FLUSH.
What parts can replace 41291-100?
There are 6 known substitutes for 41291-100: 41291-00, 41291, H2331-1-100 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 41291-100?
41291-100 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-024-6709. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 41291-100

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026