412/348-0/0000 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

412/348-0/0000: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 5.844 INCHES MINIMUM AND 5.930 INCHES MAXIMUM IN, center_hole_diameter: 5.574 INCHES MINIMUM AND 5.644 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-020-2317, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

412/348-0/0000

NSN: 5331-01-020-2317
FSC: 5331 — O-ring
CAGE: F9850 — DANA POWER TRANSMISSION FRANCE (FRA)

SPECIFICATIONS

material	RUBBER SYNTHETIC
temp_rating	-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	5.844 INCHES MINIMUM AND 5.930 INCHES MAXIMUM IN
center_hole_diameter	5.574 INCHES MINIMUM AND 5.644 INCHES MAXIMUM IN
elongation_percentage	331 MAXIMUM
cross-sectional_height	0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN	5331-01-020-2317

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 5.844 INCHES MINIMUM AND 5.930 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 331 MAXIMUM

•

CENTER HOLE DIAMETER: 5.574 INCHES MINIMUM AND 5.644 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SYNTHETIC

TECHNICAL CHARACTERISTICS

TEMP RATING	-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER	5.844 INCHES MINIMUM AND 5.930 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	331 MAXIMUM
CENTER HOLE DIAMETER	5.574 INCHES MINIMUM AND 5.644 INCHES MAXIMUM IN
MATERIAL	RUBBER SYNTHETIC

SUBSTITUTES & CROSS-REFERENCES 7

441/002-0/0012Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

703255Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

PRP255-7507Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

2-255 N674-70Reference document

Same NSN cross-reference

Reference document — Secondary reference

255-7507Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

0-3418Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 412/348-0/0000?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 412/348-0/0000?

412/348-0/0000 is a O-RING.

What parts can replace 412/348-0/0000?

There are 7 known substitutes for 412/348-0/0000: 441/002-0/0012, 703255, PRP255-7507 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 412/348-0/0000?

412/348-0/0000 is cataloged in the U.S. Government catalog under NSN 5331-01-020-2317. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

412/348-0/0000 — O-RING

Request a Quote — 412/348-0/0000