PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 41186
41186 ✓ Verified by PartsTable
Clementoni · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include length: 12.000 FEET NOMINAL FT, material: ALUMINUM ALLOY 2024, body_width: 0.300 INCHES NOMINAL IN, case_style: SQUARE, point_type: CONVENTIONAL, seal_width: 0.312 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-088-3047, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
41186
NSN: 5330-00-088-3047
FSC: 5330
CAGE: 11599 — TRIUMPH ENGINE CONTROL SYSTEMS LLC (USA)
SPECIFICATIONS
length12.000 FEET NOMINAL FT
materialALUMINUM ALLOY 2024
body_width0.300 INCHES NOMINAL IN
case_styleSQUARE
point_typeCONVENTIONAL
seal_width0.312 INCHES NOMINAL IN
body_height0.200 INCHES NOMINAL IN
body_length0.350 INCHES NOMINAL IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
flute_length8.750 INCHES NOMINAL IN
flute_quantity2
NSN5330-00-088-3047
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 41186 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
HOUSING BORE DIAMETER: 1.379 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL
•
ACCOMMODATED SHAFT DIAMETER: 0.625 INCHES NOMINAL IN
•
SEAL WIDTH: 0.312 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
HOUSING BORE DIAMETER1.379 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL
ACCOMMODATED SHAFT DIAMETER0.625 INCHES NOMINAL IN
SEAL WIDTH0.312 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
500129Interchangeable
interchangeable cross-reference
interchangeable
ND5302PC38Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751Interchangeable
interchangeable cross-reference
interchangeable
53186Interchangeable
interchangeable cross-reference
interchangeable
1302Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 41186?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41186?
41186 is a FILTER,RADIO FREQUENCY INTERFERE manufactured by Clementoni.
What parts can replace 41186?
There are 17 known substitutes for 41186: 500129, ND5302PC38, GGG-D-751 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 41186?
41186 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-088-3047. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 41186

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026