PartsTable
Technical Data Sheet
Download PDF

41174 5 — FILTER,LOW PASS

✓ Government record, cited
Legrand · MRO · MRO_GENERAL
PRODUCT OVERVIEW

41174 5: FILTER,LOW PASS.

Conform to IEC 61008-1 * AC type : detect AC component faults * A type : detect AC and DC component faults Enhanced immunity to unwanted tripping in disturbed environments Can be equipped with DX3 auxiliaries and accessories This part is cataloged in the U.S. Government catalog under NSN 5306-00-324-9471, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 41174 5
NSN: 5306-00-324-9471
NIINs: 003249471, 005010290
FSC: 5306 — Bolts
CAGE: 71747 — CHICAGO HARDWARE AND FIXTURE COMPANY (USA)
SPECIFICATIONS
materialSTEEL PROPERTY CLASS 4.6
body_width0.750 INCHES MAXIMUM IN
body_height0.968 INCHES MAXIMUM IN
body_length2.600 INCHES MAXIMUM IN
thread_class2A LOCATION NOT OTHERWISE SPECIFIED A
body_materialMETAL
inclosure_typeENCASED
overall_height1.286 INCHES MAXIMUM IN
overall_length2.600 INCHES MAXIMUM IN
style_designatorRECTANGULAR TERMINAL/TERMINALS ON TWO SURFACES
thread_directionRIGHT-HAND LOCATION NOT OTHERWISE SPECIFIED
surface_treatmentZINC OVERALL
NSN5306-00-324-9471
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 41174 5 · Legrand ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND LOCATION NOT OTHERWISE SPECIFIED
•
NOMINAL THREAD SIZE: 0.500 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
•
SURFACE TREATMENT: ZINC OVERALL
•
THREAD CLASS: 2A LOCATION NOT OTHERWISE SPECIFIED A
•
THREAD QUANTITY PER INCH: A20 LOCATION NOT OTHERWISE SPECIFIED
•
MATERIAL: STEEL PROPERTY CLASS 4.6
•
THREAD SERIES DESIGNATOR: UNF LOCATION NOT OTHERWISE SPECIFIED
TECHNICAL CHARACTERISTICS
OVERALL LENGTH6.000 FEET NOMINAL FT
THREAD DIRECTIONRIGHT-HAND LOCATION NOT OTHERWISE SPECIFIED
NOMINAL THREAD SIZE0.500 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
SURFACE TREATMENTZINC OVERALL
THREAD CLASS2A LOCATION NOT OTHERWISE SPECIFIED A
THREAD QUANTITY PER INCHA20 LOCATION NOT OTHERWISE SPECIFIED
MATERIALSTEEL PROPERTY CLASS 4.6
THREAD SERIES DESIGNATORUNF LOCATION NOT OTHERWISE SPECIFIED
SUBSTITUTES & CROSS-REFERENCES 1
98915A033Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 41174 5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41174 5?
41174 5 is a FILTER,LOW PASS manufactured by Legrand. It is classified as a MRO (MRO_GENERAL).
What parts can replace 41174 5?
There is 1 known substitute for 41174 5: 98915A033. Substitute compatibility should be verified for your specific system.
What is the NSN for 41174 5?
41174 5 is cataloged in the U.S. Government catalog under NSN 5306-00-324-9471. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 41174 5