PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 411706
411706 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SWITCH,PUSH is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN, housing_bore_diameter: 1.752 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-076-0091, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
411706
NSN: 5330-00-076-0091
FSC: 5330
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
housing_bore_diameter1.752 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.125 INCHES NOMINAL IN
NSN5330-00-076-0091
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 411706 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.125 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.752 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.125 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.752 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLEANGULAR
MATERIALSTEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
411706Interchangeable
interchangeable cross-reference
interchangeable
11109Interchangeable
interchangeable cross-reference
interchangeable
411700Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 411706?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 411706?
411706 is a SWITCH,PUSH.
What parts can replace 411706?
There are 4 known substitutes for 411706: 411706, 11109, 411700 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 411706?
411706 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-076-0091. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 411706

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026