Conform to IEC 61008 - 1, IEC 62423 (B type and F type) Compatible with prong-type and fork type supply busbars AC type : detect sinusoidal AC residual currents A type : detect sinusoidal AC and pulsating DC residual currents F type (High immunity) : detect AC and pulsating DC residual currents Enhanced immunity to unwanted tripping in disturbed environments Detection of high frequency fault currents B type : detect sinusoidal AC, pulsating DC and smooth DC residual currents Can be equipped with DX³ signalling and remote tripping auxiliaries and motorised controls This part is cataloged in the U.S. Government catalog under NSN 5990-00-553-5923, indicating validated use in U.S. government and defense logistics supply chains.
WHERE IT FITS
411525
NSN:5990-00-553-5923 NIINs:005535923, 010967682 FSC:5990 — Synchros and Resolvers CAGE:99932 — MOOG INC. (USA)
SPECIFICATIONS
length
0.0620 INCHES NOMINAL SHOULDER IN
material
STEEL CORROSION RESISTING BODY
body_size
11
body_style
STANDARD ROUND C
shaft_type
ROUND, SLOTTED SINGLE SHAFT
pilot_length
0.0620 INCHES NOMINAL IN
shaft_length
0.4260 INCHES MINIMUM AND 0.4500 INCHES MAXIMUM SINGLE SHAFT IN
overall_length
2.1600 INCHES MINIMUM AND 2.1840 INCHES MAXIMUM IN
pilot_diameter
0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
shaft_diameter
0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT IN
undercut_width
0.0500 INCHES NOMINAL IN
flange_diameter
1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM IN
NSN
5990-00-553-5923
COMPONENT DIAGRAM
KEY FEATURES
•
BODY SIZE: 11
•
SHAFT TYPE: ROUND, SLOTTED SINGLE SHAFT
•
FLANGE DIAMETER: 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM IN
•
UNDERCUT WIDTH: 0.0500 INCHES NOMINAL IN
•
SHAFT DIAMETER: 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT IN
•
UNDERCUT DIAMETER: 0.9750 INCHES NOMINAL IN
•
LENGTH: 0.0620 INCHES NOMINAL SHOULDER IN
•
FRAGILITY FACTOR: MODERATELY RUGGED
TECHNICAL CHARACTERISTICS
BODY SIZE
11
SHAFT TYPE
ROUND, SLOTTED SINGLE SHAFT
FLANGE DIAMETER
1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM IN
UNDERCUT WIDTH
0.0500 INCHES NOMINAL IN
SHAFT DIAMETER
0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 411525?
411525 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by Legrand.
What parts can replace 411525?
There are 6 known substitutes for 411525: 11RX-0434-F, TSH11F08B431, 229-0110-00 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 411525?
411525 is cataloged in the U.S. Government catalog under NSN 5990-00-553-5923. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.