PartsTable
Technical Data Sheet
PartsTable / MRO / 41152
41152 ✓ Verified by PartsTable
Lindy · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: RUBBER SYNTHETIC, sterility: STERILE, body_width: 2.203 INCHES MAXIMUM IN, body_height: 3.625 INCHES NOMINAL IN, body_length: 4.000 INCHES NOMINAL IN, design_type: SINGLE CENTRALLY LOCATED HOLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3130-00-378-9016, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 41152
NSN: 3130-00-378-9016
FSC: 3130
CAGE: 35301 — DRESSER INDUSTRIES INC LEROI DIV (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
sterilitySTERILE
body_width2.203 INCHES MAXIMUM IN
body_height3.625 INCHES NOMINAL IN
body_length4.000 INCHES NOMINAL IN
design_typeSINGLE CENTRALLY LOCATED HOLE
body_diameter0.875 INCHES NOMINAL IN
flange_height0.750 INCHES NOMINAL IN
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
terminal_typeTAB, SOLDER LUG
inclosure_typeENCAPSULATED
overall_length1.000 INCHES NOMINAL IN
NSN3130-00-378-9016
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 41152 · Lindy ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: CAST IRON,2.250 IN. H,2.688 IN. W,4.125 IN. LG,W/TWO 0.656 IN. DIA HOLES IN
TECHNICAL CHARACTERISTICS (FLIS)
GENERAL CHARACTERISTICS ITEM DESCRIPTIONCAST IRON,2.250 IN. H,2.688 IN. W,4.125 IN. LG,W/TWO 0.656 IN. DIA HOLES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
74726127Interchangeable
interchangeable cross-reference
interchangeable
41152Interchangeable
interchangeable cross-reference
interchangeable
601805Interchangeable
interchangeable cross-reference
interchangeable
9175004Interchangeable
interchangeable cross-reference
interchangeable
RYG9175620Interchangeable
interchangeable cross-reference
interchangeable
9175620Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 41152?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41152?
41152 is a RESISTOR,FIXED,WIRE WOUND,INDUCT manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).
What parts can replace 41152?
There are 9 known substitutes for 41152: 74726127, 41152, 601805 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 41152?
41152 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3130-00-378-9016. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 41152

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026