PartsTable
Technical Data Sheet
Download PDF

41129 — LEVER,MANUAL CONTROL

✓ Government record, cited
Hama · COMPONENT
PRODUCT OVERVIEW

41129: LEVER,MANUAL CONTROL.

The LEVER,MANUAL CONTROL is a Hama industrial component. Key specifications include material: COPPER ALLOY 260, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STANDARD TAPER W/TANG, construction: LAMINATED, flute_length: 4.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5133-00-189-9319, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
41129
NSN: 5133-00-189-9319
NIINs: 001899319, 009006351, 011803923
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 82333 — REPUBLIC DRILL AND TOOL CO DIV OF AEW ELECTRIC INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY 260
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
constructionLAMINATED
flute_length4.125 INCHES NOMINAL IN
hole_diameter0.217 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
overall_width2.625 INCHES NOMINAL IN
flute_quantity2
overall_length7.500 INCHES NOMINAL IN
special_featuresTAPER SHANK LG; FRACTIONAL SIZE 29/64
style_designatorNON-CIRCULAR W/O RADIUS
NSN5133-00-189-9319
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR MFR: Hama LEVER,MANUAL CONTROL TITLE COMPONENT PN 41129 MFR Hama LEVER,MANUAL CONTROL
KEY FEATURES
•
CUTTING END STYLE: GENERAL PURPOSE
•
TAPER SHANK SIZE DESIGNATOR: 1 MORSE
•
FLUTE LENGTH: 4.125 INCHES NOMINAL IN
•
NOMINAL CUTTING DIAMETER: 0.4531 INCHES IN
•
CUTTING ROTATION DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
SHANK STYLE: STANDARD TAPER W/TANG
TECHNICAL CHARACTERISTICS
CUTTING END STYLEGENERAL PURPOSE
TAPER SHANK SIZE DESIGNATOR1 MORSE
FLUTE LENGTH4.125 INCHES NOMINAL IN
OVERALL LENGTH7.500 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER0.4531 INCHES IN
CUTTING ROTATION DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SHANK STYLESTANDARD TAPER W/TANG
FLUTE QUANTITY2
SPECIAL FEATURESTAPER SHANK LG; FRACTIONAL SIZE 29/64
SUBSTITUTES & CROSS-REFERENCES 7
940 29/64Reference document
Same NSN cross-reference
Reference document — Secondary reference
110 29/64Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1302Reference document
Same NSN cross-reference
Reference document — Secondary reference
2511 29/64Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2410 29/64Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
GGG-D-751 TYEReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 41129?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41129?
41129 is a LEVER,MANUAL CONTROL manufactured by Hama.
What parts can replace 41129?
There are 7 known substitutes for 41129: 940 29/64, 110 29/64, 1302 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 41129?
41129 is cataloged in the U.S. Government catalog under NSN 5133-00-189-9319. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 41129