PartsTable
Technical Data Sheet
Download PDF

411-533 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

411-533: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN, thread_length: 0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, screw_material: STEEL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-989-7435, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
411-533
NSN: 5305-00-989-7435
NIINs: 009897435, 012953555
FSC: 5305 — Screws
CAGE: 77294 — PIPER INDUSTRIAL MANUFACTURING COMPANY, LLC DIV PIPER INDUSTRIAL MANUFACTURING COMPANY (USA)
SPECIFICATIONS
head_stylePAN
head_height0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
thread_length0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
end_item_identificationMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); ARMORED MULTI-PURPOSE VEHICLE (AMPV); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
NSN5305-00-989-7435
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 411-533 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: PAN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
FASTENER LENGTH0.625 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE
THREAD LENGTH0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEPAN
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES 10
5305PL1696632Reference document
Same NSN cross-reference
Reference document — Informative reference only
113615ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
22660ITEM1Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
AN526R1032R10Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
AB2513A10Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
23521R1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 411-533?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 411-533?
411-533 is a SCREW,MACHINE.
What parts can replace 411-533?
There are 10 known substitutes for 411-533: 5305PL1696632, 113615A, 22660ITEM1 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 411-533?
411-533 is cataloged in the U.S. Government catalog under NSN 5305-00-989-7435. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 411-533

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.