PartsTable
Technical Data Sheet
Download PDF

410OR0012 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

410OR0012: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, special_features: OIL AND FUEL RESISTANT, center_hole_diameter: 0.426 INCHES NOMINAL IN, cross-sectional_height: 0.566 INCHES NOMINAL IN, end_item_identification: F-18 E/F, part_name_assigned_by_controlling_agency: INAVY) GASKET. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-490-4307, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
410OR0012
NSN: 5331-01-490-4307
FSC: 5331 — O-ring
CAGE: 3AB22 — APOLLO MICROWAVES LTD MICRO-ONDES APOLLO LTEE (CAN)
SPECIFICATIONS
materialRUBBER
special_featuresOIL AND FUEL RESISTANT
center_hole_diameter0.426 INCHES NOMINAL IN
cross-sectional_height0.566 INCHES NOMINAL IN
end_item_identificationF-18 E/F
part_name_assigned_by_controlling_agencyINAVY) GASKET
NSN5331-01-490-4307
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 410OR0012 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.566 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.426 INCHES NOMINAL IN
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.566 INCHES NOMINAL IN
SPECIAL FEATURESOIL AND FUEL RESISTANT
CENTER HOLE DIAMETER0.426 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYINAVY) GASKET
END ITEM IDENTIFICATIONF-18 E/F
MATERIALRUBBER
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 3
77724-28/REF2-013Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
92163436Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-013Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 410OR0012?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 410OR0012?
410OR0012 is a O-RING.
What parts can replace 410OR0012?
There are 3 known substitutes for 410OR0012: 77724-28/REF2-013, 92163436, 2-013. Substitute compatibility should be verified for your specific system.
What is the NSN for 410OR0012?
410OR0012 is cataloged in the U.S. Government catalog under NSN 5331-01-490-4307. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 410OR0012