PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 410954-11
410954-11 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: LEATHER OVERALL, temp_rating: 150.0 FAHRENHEIT DEGF, rim_surface_width: 0.197 INCHES NOMINAL IN, peripheral_diameter: 7.500 INCHES NOMINAL IN, center_hole_diameter: 6.500 INCHES NOMINAL IN, cross-sectional_height: 0.394 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-982-2379, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
410954-11
NSN: 5330-00-982-2379
FSC: 5330
CAGE: 80020 — NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION JOINT BASE JBMDL (USA)
SPECIFICATIONS
materialLEATHER OVERALL
temp_rating150.0 FAHRENHEIT DEGF
rim_surface_width0.197 INCHES NOMINAL IN
peripheral_diameter7.500 INCHES NOMINAL IN
center_hole_diameter6.500 INCHES NOMINAL IN
cross-sectional_height0.394 INCHES NOMINAL IN
cross-sectional_shape_styleV
NSN5330-00-982-2379
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 410954-11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: 150.0 FAHRENHEIT DEGF
•
MATERIAL: LEATHER OVERALL
•
PERIPHERAL DIAMETER: 7.500 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 6.500 INCHES NOMINAL IN
•
RIM SURFACE WIDTH: 0.197 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.394 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: V
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING150.0 FAHRENHEIT DEGF
MATERIALLEATHER OVERALL
PERIPHERAL DIAMETER7.500 INCHES NOMINAL IN
CENTER HOLE DIAMETER6.500 INCHES NOMINAL IN
RIM SURFACE WIDTH0.197 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.394 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEV
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
M5-11Interchangeable
interchangeable cross-reference
interchangeable
S7-11Interchangeable
interchangeable cross-reference
interchangeable
177033-2Interchangeable
interchangeable cross-reference
interchangeable
R3457BInterchangeable
interchangeable cross-reference
interchangeable
M10-10RXInterchangeable
interchangeable cross-reference
interchangeable
411177-105Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 410954-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 410954-11?
410954-11 is a PACKING,PREFORMED.
What parts can replace 410954-11?
There are 15 known substitutes for 410954-11: M5-11, S7-11, 177033-2 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 410954-11?
410954-11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-982-2379. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 410954-11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026