PartsTable
Technical Data Sheet
Download PDF

4104100212 — CLAMP,BRIDGE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4104100212: CLAMP,BRIDGE.

The CLAMP,BRIDGE is a the manufacturer industrial component. Key specifications include height: 3.562 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 1.250 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN, overall_length: 12.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-171-8163, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4104100212
NSN: 5340-01-171-8163
FSC: 5340 — Hardware, Commercial
CAGE: 12361 — GROVE U.S. LLC DBA GROVE US LLC (USA)
SPECIFICATIONS
height3.562 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter1.250 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
overall_length12.000 INCHES NOMINAL IN
material_document_and_classificationA6-829-002277,FSCM 12361 MFR REF SINGLE MATERIAL RESPONSE OR A6-829-000816,FSCM 12361 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-171-8163
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4104100212 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: A6-829-002277,FSCM 12361 MFR REF SINGLE MATERIAL RESPONSE OR A6-829-000816,FSCM 12361 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
HEIGHT: 3.562 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 1.250 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONA6-829-002277,FSCM 12361 MFR REF SINGLE MATERIAL RESPONSE OR A6-829-000816,FSCM 12361 MFR REF SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH12.000 INCHES NOMINAL IN
HEIGHT3.562 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE DIAMETER1.250 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
D4-104-1-00212Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4104100212?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4104100212?
4104100212 is a CLAMP,BRIDGE.
What parts can replace 4104100212?
There is 1 known substitute for 4104100212: D4-104-1-00212. Substitute compatibility should be verified for your specific system.
What is the NSN for 4104100212?
4104100212 is cataloged in the U.S. Government catalog under NSN 5340-01-171-8163. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4104100212