PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 41038 STYLEP2
41038 STYLEP2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.625 INCHES NOMINAL IN, housing_bore_diameter: 6.002 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 4.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-368-7057, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
41038 STYLEP2
NSN: 5330-00-368-7057
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialLEATHER SEALING ELEMENT
case_styleSQUARE
seal_width0.625 INCHES NOMINAL IN
housing_bore_diameter6.002 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter4.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-368-7057
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 41038 STYLEP2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.625 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 6.002 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: LEATHER SEALING ELEMENT
•
ACCOMMODATED SHAFT DIAMETER: 4.000 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
SEAL WIDTH0.625 INCHES NOMINAL IN
HOUSING BORE DIAMETER6.002 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
MATERIALLEATHER SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER4.000 INCHES NOMINAL IN
MATERIALSTEEL CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
40141Interchangeable
interchangeable cross-reference
interchangeable
41389SInterchangeable
interchangeable cross-reference
interchangeable
304452Interchangeable
interchangeable cross-reference
interchangeable
77993Interchangeable
interchangeable cross-reference
interchangeable
5L5532-101-59Interchangeable
interchangeable cross-reference
interchangeable
5L5533-101-59Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 41038 STYLEP2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41038 STYLEP2?
41038 STYLEP2 is a SEAL,PLAIN ENCASED.
What parts can replace 41038 STYLEP2?
There are 18 known substitutes for 41038 STYLEP2: 40141, 41389S, 304452 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 41038 STYLEP2?
41038 STYLEP2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-368-7057. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 41038 STYLEP2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026