PartsTable
Technical Data Sheet
41007 ✓ Verified by PartsTable
Lindy · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Always quote matching pair — mixed wattage causes throttling Platinum/Titanium = higher efficiency = lower power cost over time
AC or DC input? Verify customer site power
PRODUCT OVERVIEW

Connect your computer to two monitors!<br>This splitter cable enables a computer, which supports simultaneous digital and analogue video output via its DVI-I output port, to be connected to two separate monitors, e.g. one DVI TFT and one VGA CRT.<br>- Connectors: DVI-I Dual Link Male to DVI-D Dual Link Female + VGA 15 Way HD Female<br>- Length: 20cm. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-189-4913, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 41007
NSN: 5999-00-189-4913
FSC: 5999
CAGE: 16636 — TITAN CORP THE (USA)
SPECIFICATIONS
materialALUMINUM BODY
tuning_typeVARIABLE
power_rating15.0 WATTS NOMINAL
terminal_typeCABLE
voltage_rating115.0 VOLTS NOMINAL AND 230.0 VOLTS NOMINAL
special_features8 OUTPUTS; 50 OHM IMPEDANCE; BNC REAR PANEL CONNECTORS; 48 TO 62 HZ; HALF RACK CHASSIS 1.750 INCH HIGH X 20 INCHES DEEP; HF MULTICOUPLER IN
terminal_quantity1
radio_frequency_rating100.0 HERTZ MINIMUM AND 32.0 MEGAHERTZ MAXIMUM
unpackaged_unit_weight6.000 POUNDS LBS
NSN5999-00-189-4913
COMPONENT DIAGRAM
PULL TAB AIRFLOW —W PLATINUM 100-240V~ 50/60Hz Lindy BACKPLANE CONN ~200 mm HOT-PLUG POWER SUPPLY | —W | Platinum AC input 100-240V | Redundant pair required | Match wattage in same chassis TITLE PSU —W PN 41007 MFR Lindy Platinum
KEY FEATURES
MATERIAL: ALUMINUM INSERT
MOUNTING METHOD: THREAD
THREAD SIZE: 7/16-32
CHAIN: NOT INCLUDED
DIAMETER: 0.685 INCHES NOMINAL IN
INSERT: INCLUDED
USAGE DESIGN: CAP FOR HOLDER,ELECTRICAL CONTACT BRUSH
TYPICAL APPLICATIONS
  • Server power supply replacement (failed or degraded)
  • Redundant power upgrade for high-availability
  • Power capacity upgrade for GPU or expansion configurations
  • Hot-swap power maintenance in production environments
  • Spare inventory for break-fix operations
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM INSERT
MOUNTING METHODTHREAD
THREAD SIZE7/16-32
CHAINNOT INCLUDED
DIAMETER0.685 INCHES NOMINAL IN
INSERTINCLUDED
USAGE DESIGNCAP FOR HOLDER,ELECTRICAL CONTACT BRUSH
END ITEM IDENTIFICATIONPART NO. ML4120-50
FASTENING FACILITYKNURLED EDGE AND SCREWDRIVER SLOT
LENGTH0.289 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
C6-3Interchangeable
interchangeable cross-reference
interchangeable
70-101Interchangeable
interchangeable cross-reference
interchangeable
C37Interchangeable
interchangeable cross-reference
interchangeable
C100-MInterchangeable
interchangeable cross-reference
interchangeable
651197Interchangeable
interchangeable cross-reference
interchangeable
2A7424Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 41007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41007?
41007 is a AMPLIFIER-POWER SUPPLY manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).
What parts can replace 41007?
There are 20 known substitutes for 41007: C6-3, 70-101, C37 and 17 more. Substitute compatibility should be verified for your specific system.
Is 41007 still available?
41007 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 41007