PartsTable
Technical Data Sheet
Download PDF

410007-344 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

410007-344: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, length: 1.174 INCHES MINIMUM AND 1.194 INCHES MAXIMUM IN, hole_diameter: 0.127 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN, overall_height: 1.327 INCHES MINIMUM AND 1.347 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S), surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-536-6468, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
410007-344
NSN: 5340-00-536-6468
FSC: 5340 — Hardware, Commercial
CAGE: 96214 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
width0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
length1.174 INCHES MINIMUM AND 1.194 INCHES MAXIMUM IN
hole_diameter0.127 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
overall_height1.327 INCHES MINIMUM AND 1.347 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.031 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
loop/holding_dimension1.120 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-17919 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-536-6468
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 410007-344 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.174 INCHES MINIMUM AND 1.194 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-17919 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 1.120 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.031 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.327 INCHES MINIMUM AND 1.347 INCHES MAXIMUM IN
LENGTH1.174 INCHES MINIMUM AND 1.194 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-17919 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION1.120 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
MATERIAL THICKNESS0.031 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
6021-7AReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 410007-344?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 410007-344?
410007-344 is a CLIP,SPRING TENSION.
What parts can replace 410007-344?
There is 1 known substitute for 410007-344: 6021-7A. Substitute compatibility should be verified for your specific system.
What is the NSN for 410007-344?
410007-344 is cataloged in the U.S. Government catalog under NSN 5340-00-536-6468. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 410007-344

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.