PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 410-2IN
410-2IN ✓ Verified by PartsTable
— · GATE VALVE
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

TAPE,PRESSURE SENSITIVE ADHESIVE. Key specifications include color: NATURAL OVERALL, material: PAPER BASIC, temp_rating: -65.0 FAHRENHEIT MINIMUM AND 300.0 FAHRENHEIT MAXIMUM DEGF, nominal_width: 2.000 INCHES IN, nominal_length: 36.0 YARDS, surface_luster: LUSTERLESS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-263-9137, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
410-2IN
NSN: 4820-00-263-9137
FSC: 4820
CAGE: 14959 — CRANE CO DIV VALVE DIV (USA)
SPECIFICATIONS
colorNATURAL OVERALL
materialPAPER BASIC
temp_rating-65.0 FAHRENHEIT MINIMUM AND 300.0 FAHRENHEIT MAXIMUM DEGF
nominal_width2.000 INCHES IN
nominal_length36.0 YARDS
surface_lusterLUSTERLESS
special_featuresFLAME RESISTANT
adhesive_locationBOTH SIDES
features_providedLINER
core_nominal_diameter3.000 INCHES IN
material_transparencyOPAQUE
environmental_protectionWATER RESISTANT
NSN4820-00-263-9137
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 410-2IN · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BONNET TYPE: INSIDE SCREW
•
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED: 150.0 FAHRENHEIT GAS, NATURAL AND 335.0 FAHRENHEIT STEAM AND 200.0 FAHRENHEIT WATER, FRESH AND 150.0 FAHRENHEIT FUEL/OIL, HYDROCARBON DEGF
•
MATERIAL: COPPER ALLOY BODY
•
NOMINAL THREAD SIZE: 2.000 INCHES IN
•
STEM TYPE: NONRISING
•
THREAD SERIES DESIGNATOR: NPT
•
OPERATING PRESSURE AND TYPE: 150.0 POUNDS PER SQUARE INCH (PSI) NATURAL GAS MAXIMUM REQUIRED AND 150.0 POUNDS PER SQUARE INCH (PSI) STEAM MAXIMUM REQUIRED AND 150.0 POUNDS PER SQUARE INCH (PSI) FRESH WATER MAXIMUM REQUIRED AND 150.0 POUNDS PER SQUARE INCH (PSI) HYDROCARBON FUEL OR OIL MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BONNET TYPEINSIDE SCREW
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED150.0 FAHRENHEIT GAS, NATURAL AND 335.0 FAHRENHEIT STEAM AND 200.0 FAHRENHEIT WATER, FRESH AND 150.0 FAHRENHEIT FUEL/OIL, HYDROCARBON DEGF
MATERIALCOPPER ALLOY BODY
NOMINAL THREAD SIZE2.000 INCHES IN
STEM TYPENONRISING
THREAD SERIES DESIGNATORNPT
OPERATING PRESSURE AND TYPE150.0 POUNDS PER SQUARE INCH (PSI) NATURAL GAS MAXIMUM REQUIRED AND 150.0 POUNDS PER SQUARE INCH (PSI) STEAM MAXIMUM REQUIRED AND 150.0 POUNDS PER SQUARE INCH (PSI) FRESH WATER MAXIMUM REQUIRED AND 150.0 POUNDS PER SQUARE INCH (PSI) HYDROCARBON FUEL OR OIL MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
MATERIALCOPPER ALLOY DISK
MATERIALCOPPER ALLOY SEAT
BONNET ATTACHMENT METHODTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
410 2 IN.Interchangeable
interchangeable cross-reference
interchangeable
02Interchangeable
interchangeable cross-reference
interchangeable
BT2005-2Interchangeable
interchangeable cross-reference
interchangeable
425 2 IN.Interchangeable
interchangeable cross-reference
interchangeable
P11 50X55Interchangeable
interchangeable cross-reference
interchangeable
410Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 410-2IN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 410-2IN?
410-2IN is a TAPE,PRESSURE SENSITIVE ADHESIVE.
What parts can replace 410-2IN?
There are 6 known substitutes for 410-2IN: 410 2 IN., 02, BT2005-2 and 3 more. Substitute compatibility should be verified for your specific system.
Is 410-2IN still available?
410-2IN is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 410-2IN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026