PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 41-855
41-855 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

THREADING MACHINE,PIPE AND BOLT. Key specifications include end_style: SHORT TWISTED HOOK BOTH ENDS, design_type: CLOSED, hook_radius: 0.105 INCHES NOMINAL BOTH ENDS IN, coil_quantity: 10, inside_diameter: 0.211 INCHES NOMINAL IN, style_designator: CYLINDRICAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-271-4094, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
41-855
NSN: 5315-00-271-4094
FSC: 5315
CAGE: 97907 — TEREX CORP (USA)
SPECIFICATIONS
end_styleSHORT TWISTED HOOK BOTH ENDS
design_typeCLOSED
hook_radius0.105 INCHES NOMINAL BOTH ENDS IN
coil_quantity10
inside_diameter0.211 INCHES NOMINAL IN
style_designatorCYLINDRICAL
surface_treatmentOXIDE OVERALL
spring_free_length0.844 INCHES NOMINAL IN
coil_helix_directionRIGHT-HAND OR LEFT-HAND
spring_free_outside_diameter0.285 INCHES NOMINAL IN
material_document_and_classificationQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-271-4094
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 41-855 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: STEPPED
•
MATERIAL: STEEL OVERALL
•
STARTING EDGE SHAPE: STRAIGHT
•
FIRST FLAT LENGTH: 1.797 INCHES NOMINAL IN
•
FLAT HEIGHT: 0.219 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.250 INCHES NOMINAL IN
STYLE DESIGNATORSTEPPED
MATERIALSTEEL OVERALL
STARTING EDGE SHAPESTRAIGHT
FIRST FLAT LENGTH1.797 INCHES NOMINAL IN
OVERALL LENGTH2.281 INCHES NOMINAL IN
FLAT HEIGHT0.219 INCHES NOMINAL IN
OVERALL WIDTH0.344 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
SM-B-525440Interchangeable
interchangeable cross-reference
interchangeable
5869Interchangeable
interchangeable cross-reference
interchangeable
VR495Interchangeable
interchangeable cross-reference
interchangeable
005869Interchangeable
interchangeable cross-reference
interchangeable
1118426Interchangeable
interchangeable cross-reference
interchangeable
070063Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 41-855?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41-855?
41-855 is a THREADING MACHINE,PIPE AND BOLT.
What parts can replace 41-855?
There are 21 known substitutes for 41-855: SM-B-525440, 5869, VR495 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 41-855?
41-855 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-271-4094. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 41-855

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026