PartsTable
Technical Data Sheet
PartsTable / MRO / 41-251
41-251 ✓ Verified by PartsTable
Lindy · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

- Ideal for connecting two DVI cables around a tight corner<br>- Suitable for use with flat screen TVs and monitors to allow easier cable access<br>- Tough, moulded plastic design<br>- High quality gold plated connectors for excellent signal transfer and corrosion resistance<br>- All pins wired for maximum compatibility with a range of cables<br>- Ideal for use in trunking to achieve right angled bends by joining two cables together<br>- Connectors: 1 x DVI-I Female with hex thumbscrews to 1 x DVI-I Female with thumbscrews This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3040-00-104-4838, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 41-251
NSN: 3040-00-104-4838
FSC: 3040
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
colorYELLOW
length1.875 INCHES NOMINAL IN
materialSTEEL
edge_typeGROUND
thickness0.125 INCHES NOMINAL IN
design_formPREBENT
roller_typeSOLID
usage_designKNEE
bore_diameter0.1870 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
end_item_nameTRUCK,PANEL
overall_width0.238 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
overall_length0.600 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
NSN3040-00-104-4838
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR MFR: Lindy TRANSFORMER,RADIO FREQUENCY TITLE COMPONENT PN 41-251 MFR Lindy TRANSFORMER,RADIO FREQ
KEY FEATURES
•
CLAMP SECURING HOLE STYLE: THREADED
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI W1 ASSN STD SINGLE MATERIAL RESPONSE
•
SURFACE FINISH: 250 MICROINCHES BOTH BEARING FLATS
•
STYLE DESIGNATOR: RECTANGULAR, SINGLE BOLT SECURED
•
SURFACE TREATMENT: OXIDE
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS (FLIS)
CLAMP SECURING HOLE STYLETHREADED
MATERIAL DOCUMENT AND CLASSIFICATIONAISI W1 ASSN STD SINGLE MATERIAL RESPONSE
SURFACE FINISH250 MICROINCHES BOTH BEARING FLATS
STYLE DESIGNATORRECTANGULAR, SINGLE BOLT SECURED
SURFACE TREATMENTOXIDE
SPECIAL FEATURESONE 0.041 IN. MIN,0.046 IN. MAX DIA HOLE DRILLED THRU LENGTH OF BALANCE IN
SURFACE FINISH125 MICROINCHES INSIDE PERIPHERY
MATERIALSTEEL
BORE DIAMETER0.1870 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
NOMINAL THREAD SIZE0.112 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
41251Interchangeable
interchangeable cross-reference
interchangeable
41251-01Interchangeable
interchangeable cross-reference
interchangeable
41485AInterchangeable
interchangeable cross-reference
interchangeable
09-41251Interchangeable
interchangeable cross-reference
interchangeable
9-41251Interchangeable
interchangeable cross-reference
interchangeable
41378Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 41-251?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41-251?
41-251 is a TRANSFORMER,RADIO FREQUENCY manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).
What parts can replace 41-251?
There are 9 known substitutes for 41-251: 41251, 41251-01, 41485A and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 41-251?
41-251 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3040-00-104-4838. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 41-251

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026