PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 40SW40FCL48FCL37-16 3-8IN
40SW40FCL48FCL37-16 3-8IN ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 37.0 DEGREES SECOND END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, flange_style: ROUND W/ OUT BOLT HOLES FIRST END, connection_type: PLAIN FACE FLANGE FIRST END, inside_diameter: 2.500 INCHES NOMINAL IN, connection_style: PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-241-4620, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
40SW40FCL48FCL37-16 3-8IN
NSN: 4720-00-241-4620
FSC: 4720
CAGE: 70434 — ANCHOR SWAN CORP SUB OF AMERACE CORP (USA)
SPECIFICATIONS
flow_angle37.0 DEGREES SECOND END
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
flange_styleROUND W/ OUT BOLT HOLES FIRST END
connection_typePLAIN FACE FLANGE FIRST END
inside_diameter2.500 INCHES NOMINAL IN
connection_stylePLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) FIRST END
outside_diameter3.125 INCHES NOMINAL IN
special_featuresCLAMPS FURNISHED
operating_pressure65.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure250.0 POUNDS PER SQUARE INCH LBS
end_connection_designELBOW SECOND END
end_flange_constructionSOLID SECOND END
NSN4720-00-241-4620
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 40SW40FCL48FCL37-16 3-8IN · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 16.375 INCHES NOMINAL OVERALL IN
•
FLOW ANGLE: 37.0 DEGREES SECOND END
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF
•
FLANGE OUTSIDE DIAMETER: 3.312 INCHES NOMINAL FIRST END IN
•
INSIDE DIAMETER: 2.500 INCHES NOMINAL IN
•
OPERATING PRESSURE: 65.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
•
FLANGE STYLE: ROUND W/ OUT BOLT HOLES SECOND END
•
CONNECTION TYPE: PLAIN FACE FLANGE SECOND END
TECHNICAL CHARACTERISTICS (FLIS)
MEASURING METHOD AND LENGTH16.375 INCHES NOMINAL OVERALL IN
FLOW ANGLE37.0 DEGREES SECOND END
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF
FLANGE OUTSIDE DIAMETER3.312 INCHES NOMINAL FIRST END IN
INSIDE DIAMETER2.500 INCHES NOMINAL IN
OPERATING PRESSURE65.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
FLANGE STYLEROUND W/ OUT BOLT HOLES SECOND END
CONNECTION TYPEPLAIN FACE FLANGE SECOND END
SPECIAL FEATURESCLAMPS FURNISHED
OUTSIDE DIAMETER3.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
13805Interchangeable
interchangeable cross-reference
interchangeable
57012Interchangeable
interchangeable cross-reference
interchangeable
40-1930PC34Interchangeable
interchangeable cross-reference
interchangeable
8149343Interchangeable
interchangeable cross-reference
interchangeable
360011Interchangeable
interchangeable cross-reference
interchangeable
GA801UK131SInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 40SW40FCL48FCL37-16 3-8IN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 40SW40FCL48FCL37-16 3-8IN?
40SW40FCL48FCL37-16 3-8IN is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 40SW40FCL48FCL37-16 3-8IN?
There are 10 known substitutes for 40SW40FCL48FCL37-16 3-8IN: 13805, 57012, 40-1930PC34 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 40SW40FCL48FCL37-16 3-8IN?
40SW40FCL48FCL37-16 3-8IN is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-241-4620. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 40SW40FCL48FCL37-16 3-8IN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026