PartsTable
Technical Data Sheet
Download PDF

40S119-4-4BB — STUD ASSEMBLY,TURNLOCK FASTENER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

40S119-4-4BB: STUD ASSEMBLY,TURNLOCK FASTENER.

STUD ASSEMBLY,TURNLOCK FASTENER. Key specifications include diameter: 0.377 INCHES MINIMUM AND 0.384 INCHES MAXIMUM IN, material: STEEL EJECTOR SPRING, drive_type: CROSS RECESS, eyelet_length: 0.257 INCHES NOMINAL IN, stud_head_height: 0.102 INCHES NOMINAL IN, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-639-7954, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
40S119-4-4BB
NSN: 5325-00-639-7954
NIINs: 006397954, 011219181
FSC: 5325 — Fastening Devices
CAGE: 92376 — SUNKIST GROWERS INC (USA)
SPECIFICATIONS
diameter0.377 INCHES MINIMUM AND 0.384 INCHES MAXIMUM IN
materialSTEEL EJECTOR SPRING
drive_typeCROSS RECESS
eyelet_length0.257 INCHES NOMINAL IN
stud_head_height0.102 INCHES NOMINAL IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
stud_assembly_styleSTUD ASSEMBLY
eyelet_outside_diameter0.341 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN
turnlock_stud_head_styleSTUD HEAD
material_accommodated_thickness0.141 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
material_document_and_classificationQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE PIN
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5325-00-639-7954
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 40S119-4-4BB · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EYELET OUTSIDE DIAMETER: 0.341 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN
•
DRIVE TYPE: CROSS RECESS
•
MATERIAL ACCOMMODATED THICKNESS: 0.141 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE PIN
•
DIAMETER: 0.377 INCHES MINIMUM AND 0.384 INCHES MAXIMUM IN
•
STUD HEAD HEIGHT: 0.102 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
EYELET OUTSIDE DIAMETER0.341 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN
DRIVE TYPECROSS RECESS
MATERIAL ACCOMMODATED THICKNESS0.141 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE PIN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE EJECTOR SPRING
DIAMETER0.377 INCHES MINIMUM AND 0.384 INCHES MAXIMUM IN
STUD HEAD HEIGHT0.102 INCHES NOMINAL IN
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM IN
TURNLOCK STUD HEAD STYLESTUD HEAD
SUBSTITUTES & CROSS-REFERENCES 7
12861-899-29Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
BACS21X4RReference document
Same NSN cross-reference
Reference document — Secondary reference
BACS21ED4RReference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
40S5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1142005-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5325PL0952442Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 40S119-4-4BB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 40S119-4-4BB?
40S119-4-4BB is a STUD ASSEMBLY,TURNLOCK FASTENER.
What parts can replace 40S119-4-4BB?
There are 7 known substitutes for 40S119-4-4BB: 12861-899-29, BACS21X4R, BACS21ED4R and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 40S119-4-4BB?
40S119-4-4BB is cataloged in the U.S. Government catalog under NSN 5325-00-639-7954. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 40S119-4-4BB

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.