PartsTable
Technical Data Sheet
4093 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The POST,BINDING,ELECTRICAL is a the manufacturer industrial component. Key specifications include width: 0.1023 INCHES NOMINAL IN, length: 1.2006 INCHES NOMINAL IN, material: STEEL COMP 303 OVERALL, nut_style: KNURLED, case_style: SQUARE, seal_width: 0.391 INCHES MINIMUM AND 0.421 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-196-4395, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4093
NSN: 5330-00-196-4395
FSC: 5330
CAGE: 1TUY2 — TITAN DISTRIBUTION INC DBA TITAN TIRE (USA)
SPECIFICATIONS
width0.1023 INCHES NOMINAL IN
length1.2006 INCHES NOMINAL IN
materialSTEEL COMP 303 OVERALL
nut_styleKNURLED
case_styleSQUARE
seal_width0.391 INCHES MINIMUM AND 0.421 INCHES MAXIMUM IN
body_length0.718 INCHES NOMINAL IN
knurl_width0.250 INCHES NOMINAL IN
corner_shapeSQUARE ALL CORNERS
nut_diameter1.000 INCHES NOMINAL IN
thread_class2B
nut_thickness0.750 INCHES NOMINAL IN
NSN5330-00-196-4395
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4093 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
HOUSING BORE DIAMETER: 2.327 INCHES NOMINAL IN
CASE STYLE: SQUARE
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLE: ANGULAR
SEAL WIDTH: 0.391 INCHES MINIMUM AND 0.421 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER2.327 INCHES NOMINAL IN
CASE STYLESQUARE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.391 INCHES MINIMUM AND 0.421 INCHES MAXIMUM IN
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER1.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
DN84AInterchangeable
interchangeable cross-reference
interchangeable
875-2Interchangeable
interchangeable cross-reference
interchangeable
504Interchangeable
interchangeable cross-reference
interchangeable
12951000Interchangeable
interchangeable cross-reference
interchangeable
301-000 P3K0 509DInterchangeable
interchangeable cross-reference
interchangeable
8751Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4093?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4093?
4093 is a POST,BINDING,ELECTRICAL.
What parts can replace 4093?
There are 18 known substitutes for 4093: DN84A, 875-2, 504 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4093?
4093 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-196-4395. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4093