PartsTable
Technical Data Sheet
Download PDF

4088931 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4088931: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 4.357 INCHES MINIMUM AND 4.433 INCHES MAXIMUM IN, center_hole_diameter: 3.960 INCHES MINIMUM AND 3.990 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-579-7912, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4088931
NSN: 5331-00-579-7912
FSC: 5331 — O-ring
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter4.357 INCHES MINIMUM AND 4.433 INCHES MAXIMUM IN
center_hole_diameter3.960 INCHES MINIMUM AND 3.990 INCHES MAXIMUM IN
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
NSN5331-00-579-7912
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4088931 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 4.357 INCHES MINIMUM AND 4.433 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 3.960 INCHES MINIMUM AND 3.990 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
OUTSIDE DIAMETER4.357 INCHES MINIMUM AND 4.433 INCHES MAXIMUM IN
CENTER HOLE DIAMETER3.960 INCHES MINIMUM AND 3.990 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 8
2-345 N304-75Reference document
Same NSN cross-reference
Reference document — Secondary reference
ARP568-345MILP5 516-70DURMReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
6227-48Reference document
Same NSN cross-reference
Reference document — Secondary reference
PRP568-345-4067-70Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1183Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
1376-04-122PReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 4088931?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4088931?
4088931 is a O-RING.
What parts can replace 4088931?
There are 8 known substitutes for 4088931: 2-345 N304-75, ARP568-345MILP5 516-70DURM, 6227-48 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4088931?
4088931 is cataloged in the U.S. Government catalog under NSN 5331-00-579-7912. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4088931